1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Desk & office
Mac Studio M4 Thunderbolt cable comb
This is not a fixed STL. SpeakCAD generates the mac studio m4 thunderbolt cable comb to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a mac studio m4 thunderbolt cable comb is
A comb that sits on the rear I/O of a Mac Studio M4 and separates four Thunderbolt 5 cables plus HDMI so they unplug one at a time. The body is 180 × 22 × 18 mm with five saddles (8 mm × 4 and 14 mm HDMI) and two 3 mm lips that hook the Studio's rear lip. Print in PETG with 2 mm walls.
Cables behind a Studio become a single brick. Tell SpeakCAD how many TB ports you use, preview the comb in the browser at no cost, then download the STL.
Example prompt
Design a Mac Studio M4 Thunderbolt comb 180×22×18 mm, four 8 mm saddles plus 14 mm HDMI, two 3 mm rear lips, 2 mm PETG.
People also search
mac studio cable comb stlmac studio m4 thunderbolt organizer 3d printstudio tb5 cable holdermac studio rear comb 3d model
Questions people ask about a mac studio m4 thunderbolt cable comb
A comb that sits on the rear I/O of a Mac Studio M4 and separates four Thunderbolt 5 cables plus HDMI so they unplug one at a time. The body is 180 × 22 × 18 mm with five saddles (8 mm × 4 and 14 mm HDMI) and two 3 mm lips that hook the Studio's rear lip. Print in PETG with 2 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Design a Mac Studio M4 Thunderbolt comb 180×22×18 mm, four 8 mm saddles plus 14 mm HDMI, two 3 mm rear lips, 2 mm PETG.
Cables behind a Studio become a single brick. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
Logitech MX Mechanical palm restA 18 mm palm rest that matches an MX Mechanical (about 430 × 150 mm) with a 8 mm front radius and four 3 mm rubber-foot recesses.Pen cup with sloped compartmentsA desk pen holder divided into three angled compartments so pens, markers and scissors each lean forward and stay easy to grab.Elgato Wave 3 microphone desk riser with cable slotA riser that lifts the Elgato Wave:3 closer to mouth height without a boom arm.Logitech MX Master 4 charging-puck standA stand that holds a Logitech MX Master 4 (about 126 × 84 × 51 mm) on its USB-C or wireless puck at 10 degrees so the thumb rest stays up.HackRF One PortaPack H2M standA stand that holds a HackRF + PortaPack H2M at 30 degrees with a 14 mm USB slot.iPad Pro 11-inch M4 Pencil charging standA stand that holds an 11-inch iPad Pro M4 (about 250 × 177 × 5.3 mm) at 60 degrees for StandBy and parks an Apple Pencil Pro on a 9 mm MagSafe saddle.