Desk & office

iPhone 16 Pro bedside MagSafe charging stand for StandBy

A nightstand stand that holds an Apple MagSafe puck at 65 degrees so an iPhone 16 Pro (149.6 x 71.5 x 8.25 mm) charges in landscape and shows the StandBy clock. The puck (56 mm diameter, about 5.5 mm thick) sits in a 56.4 mm pocket with a 1.2 mm lip, the cable runs down a 4 mm channel through the 90 x 70 mm base, and the base is hollow underneath so you can add coins or steel washers for weight. Walls are 3 mm and it prints upright with the pocket facing up.

Off-the-shelf stands are drawn for the original Apple puck only, and the Anker MagGo or Belkin discs are a different thickness. In SpeakCAD you describe the puck you have and the viewing angle you want, preview the stand free in the browser, adjust the pocket or add a weight pocket in the chat, then download the STL.

Get it nowGenerate and preview for free, in your browser. A download costs 2 credits.

Design a bedside MagSafe stand with a 56.4 mm diameter, 5.5 mm deep puck pocket tilted 65 degrees for landscape StandBy, a 1.2 mm retaining lip, a 4 mm cable channel to the rear, a 90 x 70 x 12 mm base hollowed for ballast and 3 mm walls.

Change any number to match what you measured. The AI keeps the rest of the design consistent, and small follow-up edits after a download are free.

More desk & office

Oura Ring charger puck desk dock with ring restA small desk dock that holds the round Oura Ring charger, roughly 50 mm across on Gen3 and Ring 4, and raises it so the ring sits on the post at a comfortabl…Anker 7-in-1 USB-C hub under-desk clip holderA holder that screws under the desk edge and grips an Anker 7-in-1 USB-C hub so its ports face forward within reach.Angled desk phone stand with cable slotA 60 degree cradle that holds a phone upright for video calls while a charging cable passes up through a slot in the base.Angled business card holder for deskA tilted display block that fans a stack of up to 30 business cards forward so visitors can take one cleanly.Desk tray for paper clips and binder clipsA shallow sorting tray that separates paper clips, binder clips of two sizes and push pins into distinct wells.Kindle Paperwhite desk reading stand with USB-C cable slotA reclining stand that holds a Kindle Paperwhite (176.7 x 127.6 x 7.8 mm for the 2024 model, 174.2 x 124.6 x 8.1 mm for the 2021) at 60 degrees for hands-fre…

Make your iphone 16 pro bedside magsafe charging stand for standby now

Nothing to install and no CAD skills needed. Describe it, watch it render, download the STL or 3MF and print it tonight.

Get it nowBrowse the library
Looking for a ready-made version? Check the marketplace, where makers sell finished, rated models for credits.