1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Desk & office
Nothing Phone (3) Glyph desk stand
This is not a fixed STL. SpeakCAD generates the nothing phone (3) glyph desk stand to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a nothing phone (3) glyph desk stand is
A clear-back-friendly stand for a Nothing Phone (3) (about 160 × 76 × 8.3 mm) that holds the phone at 65 degrees so the Glyph interface stays visible. The well is 78 × 10 mm, open at the back except for a 12 mm USB-C slot, and 4 mm side wings keep a transparent case from sliding. The base is 100 × 70 mm with a 15 × 40 mm cable tidy underneath. Print in a light PLA so the Glyph LEDs still glow through the gap.
Opaque docks hide the Glyph. Tell SpeakCAD the case thickness and the angle you want, preview the stand in the browser without paying, then download the STL.
Example prompt
Model a Nothing Phone 3 desk stand 100×70×80 mm with a 78×10 mm well at 65 degrees, open back, 12 mm USB-C slot, 4 mm side wings, 15×40 mm underside cable tidy and 2 mm walls.
People also search
nothing phone 3 stand stlnothing phone 3 glyph stand 3d printnothing phone desk docknothing phone 3 charging stand 3d model
Questions people ask about a nothing phone (3) glyph desk stand
A clear-back-friendly stand for a Nothing Phone (3) (about 160 × 76 × 8.3 mm) that holds the phone at 65 degrees so the Glyph interface stays visible. The well is 78 × 10 mm, open at the back except for a 12 mm USB-C slot, and 4 mm side wings keep a transparent case from sliding. The base is 100 × 70 mm with a 15 × 40 mm cable tidy underneath. Print in a light PLA so the Glyph LEDs still glow through the gap.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model a Nothing Phone 3 desk stand 100×70×80 mm with a 78×10 mm well at 65 degrees, open back, 12 mm USB-C slot, 4 mm side wings, 15×40 mm underside cable tidy and 2 mm walls.
Opaque docks hide the Glyph. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
HackRF One PortaPack H2M standA stand that holds a HackRF + PortaPack H2M at 30 degrees with a 14 mm USB slot.iPad Pro 11-inch M4 Pencil charging standA stand that holds an 11-inch iPad Pro M4 (about 250 × 177 × 5.3 mm) at 60 degrees for StandBy and parks an Apple Pencil Pro on a 9 mm MagSafe saddle.IKEA ALEX monitor-riser 60 mm grommetA 60 mm round grommet for a homemade ALEX monitor riser so cables drop behind the drawers instead of over the front.Angled desk phone stand with cable slotA 60 degree cradle that holds a phone upright for video calls while a charging cable passes up through a slot in the base.Oura Ring charger puck desk dock with ring restA small desk dock that holds the round Oura Ring charger, roughly 50 mm across on Gen3 and Ring 4, and raises it so the ring sits on the post at a comfortabl…Keychron Q1 HE magnetic wrist restA 20 mm tall wrist rest that matches a Keychron Q1 HE (about 380 × 150 mm) with two 8 × 2 mm magnet pockets that line up with the case's front magnets.