1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Desk & office
Bose Smart Ultra soundbar cable comb
This is not a fixed STL. SpeakCAD generates the bose smart ultra soundbar cable comb to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a bose smart ultra soundbar cable comb is
A comb that sits behind a Smart Ultra soundbar and separates HDMI eARC, power and optical so they do not knot. The body is 160 × 20 × 16 mm with four 8 mm saddles and two 4.5 mm holes. Print in PETG with 1.6 mm walls.
A generic comb is too tall and lifts the bar. In SpeakCAD you set cable count, preview the comb in the browser for free, then download the STL.
Example prompt
Create a Smart Ultra soundbar comb 160×20×16 mm, four 8 mm saddles, two 4.5 mm holes, 1.6 mm PETG.
People also search
bose ultra soundbar comb stlsmart ultra cable organizer 3d printbose soundbar cable tidybose ultra bar comb 3d model
Questions people ask about a bose smart ultra soundbar cable comb
A comb that sits behind a Smart Ultra soundbar and separates HDMI eARC, power and optical so they do not knot. The body is 160 × 20 × 16 mm with four 8 mm saddles and two 4.5 mm holes. Print in PETG with 1.6 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Create a Smart Ultra soundbar comb 160×20×16 mm, four 8 mm saddles, two 4.5 mm holes, 1.6 mm PETG.
A generic comb is too tall and lifts the bar. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
Studio Display USB-C hub shelfA 18 mm shelf that hangs from the Studio Display's rear Thunderbolt cable and holds a USB-C hub so Ethernet and SD do not hang off the single upstream port.IKEA KALLAX cube 50 mm cable passA 50 mm pass-through for a KALLAX cube used as a printer or game stand so power can exit the back without a raw hole.Framework Desktop under-desk trayA ventilated tray that clamps a Framework Desktop (about 190 × 190 × 75 mm) under a 15–36 mm desk so the rear exhaust stays open.AirPods Pro 2 case charging stand for MagSafe puckA small stand that holds an Apple MagSafe puck at 70 degrees and cradles the AirPods Pro 2 case (60.6 x 45.2 x 21.7 mm) against it, aligning the case coil wi…Galaxy Tab S10 Ultra easel standAn easel that holds a Galaxy Tab S10 Ultra (about 326 × 208 × 5.4 mm) at 20 or 50 degrees for drawing, with a 210 mm ledge 10 mm deep and a folding 6 mm pin…Audient EVO 4 mic-stand clampA clamp that hangs an EVO 4 on a 15–25 mm mic stand so the interface sits next to the mic.