1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Desk & office
Mac mini M4 HDMI and SD dongle tray
This is not a fixed STL. SpeakCAD generates the mac mini m4 hdmi and sd dongle tray to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a mac mini m4 hdmi and sd dongle tray is
A tray that sits beside a Mac mini M4 (about 127 × 127 × 50 mm) and holds an HDMI/SD dongle plus two SD cards so they do not dangle from the rear ports. The plate is 140 × 70 × 18 mm with a 72 × 24 mm dongle well, two 25 × 3 mm SD slots, and a 16 mm cable channel aimed at the mini's HDMI port. Print flat in PLA with 1.6 mm walls.
A dongle hanging off the mini is how HDMI ports crack. Describe the dongle in SpeakCAD, preview the tray in the browser at no cost, then download the STL.
Example prompt
Design a Mac mini M4 dongle tray 140×70×18 mm with a 72×24 mm well, two 25×3 mm SD slots, 16 mm cable channel, 1.6 mm walls.
People also search
mac mini m4 dongle tray stlmac mini hdmi sd holder 3d printmac mini m4 card trayapple mini dongle organizer 3d model
Questions people ask about a mac mini m4 hdmi and sd dongle tray
A tray that sits beside a Mac mini M4 (about 127 × 127 × 50 mm) and holds an HDMI/SD dongle plus two SD cards so they do not dangle from the rear ports. The plate is 140 × 70 × 18 mm with a 72 × 24 mm dongle well, two 25 × 3 mm SD slots, and a 16 mm cable channel aimed at the mini's HDMI port. Print flat in PLA with 1.6 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Design a Mac mini M4 dongle tray 140×70×18 mm with a 72×24 mm well, two 25×3 mm SD slots, 16 mm cable channel, 1.6 mm walls.
A dongle hanging off the mini is how HDMI ports crack. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
IKEA LACK side-table cable clipA clip that grabs a LACK side-table apron (about 50 mm) and parks a lamp cable so it does not show from the sofa.Samsung The Frame soundbar gap shimA shim that sits between a The Frame (2024/2025) and a soundbar so the Slim Fit Cam still sees the room.Kindle Paperwhite desk reading stand with USB-C cable slotA reclining stand that holds a Kindle Paperwhite (176.7 x 127.6 x 7.8 mm for the 2024 model, 174.2 x 124.6 x 8.1 mm for the 2021) at 60 degrees for hands-fre…Whoop 5.0 battery pack nightstand dockA nightstand dock that holds a Whoop 5.0 battery pack (about 29 × 22 × 8 mm) on its contacts with a 30 × 23 mm well 6 mm deep and a 4 mm USB-C slot at the back.Teenage Engineering OP-1 Field standA low stand that holds an OP-1 Field at 12 degrees with a 14 mm USB-C slot and 3 mm side lips so it does not slide.Apple Pencil Pro MagSafe pair trayA tray that parks an Apple Pencil Pro and a USB-C Pencil side by side with 9 mm saddles and a 12 mm cap well.