Two-piece tablet stand with adjustable angle
A cradle and a folding prop that together hold a tablet at 30, 45 or 60 degrees. The cradle has a 14 mm deep pocket with a 6 mm lip and a cable slot, and the prop clicks into one of three 8 mm notches on the cradle's back. Both parts print flat with 3 mm walls, the notches have 0.3 mm clearance so the prop fits snugly, and rubber-feet recesses stop the stand sliding.
A stand generated from your tablet's measured width and case thickness holds it without the wobble of a universal design. Describe the device to SpeakCAD, preview both pieces in the browser for free, change the angle set or add a pen tray to the cradle by typing, and download the STL files when you are ready to print.
Create a two-piece tablet stand: a cradle 260 mm wide with a 14 mm deep pocket, 6 mm lip and three 8 mm notches at 30, 45 and 60 degrees on its back; and a 100 mm prop that fits the notches with 0.3 mm clearance, 3 mm walls.