1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Desk & office
Focusrite Scarlett Solo 4th Gen angled stand
This is not a fixed STL. SpeakCAD generates the focusrite scarlett solo 4th gen angled stand to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a focusrite scarlett solo 4th gen angled stand is
A 20 degree stand for a Scarlett Solo 4th Gen with a 14 mm USB-C slot and 10 mm foot recesses. Print in PLA.
Flat on the desk hides the gain halo. In SpeakCAD you confirm Solo vs 2i2, preview the stand in the browser at no cost, then download the STL.
Example prompt
Design a Solo 4th Gen stand, 20 degrees, 14 mm USB-C, 10 mm foot recesses, 2 mm walls.
People also search
scarlett solo 4th stand stlfocusrite solo 4th gen stand 3d printscarlett solo angled risersolo 4th desk stand 3d model
Questions people ask about a focusrite scarlett solo 4th gen angled stand
A 20 degree stand for a Scarlett Solo 4th Gen with a 14 mm USB-C slot and 10 mm foot recesses. Print in PLA.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Design a Solo 4th Gen stand, 20 degrees, 14 mm USB-C, 10 mm foot recesses, 2 mm walls.
Flat on the desk hides the gain halo. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
Keychron Q8 Max split palm restA split palm rest for a Q8 Max Alice with two 8 × 2 mm magnet pockets matching the case.Mac mini M4 HDMI and SD dongle trayA tray that sits beside a Mac mini M4 (about 127 × 127 × 50 mm) and holds an HDMI/SD dongle plus two SD cards so they do not dangle from the rear ports.IKEA ALEX desk 80 mm round grommetAn 80 mm round grommet for a drilled ALEX desk top so monitor and laptop cables drop into the drawer stack.Steam Deck 2 JSAUX dock cable combA comb that sits behind a JSAUX-style Deck 2 dock and separates HDMI, USB-C and power so they do not unplug when you grab the Deck.Garmin Fenix and Forerunner charging cable dock standA desk dock that holds the Garmin four-pin charging plug pointing upward, so a Fenix 7 (47 mm case) or Forerunner 265 (46.1 mm case) drops onto the connector…iPad Pro 11 M5 Magic Keyboard riserA two-piece riser that lifts an 11-inch iPad Pro M5 in its Magic Keyboard (about 250 × 178 × 16 mm closed) by 40 mm so a USB-C hub can sit underneath.