1
Desk & office
MacBook Air 13-inch M4 vertical dock
A vertical dock that holds a 13-inch MacBook Air M4 (about 11.3 mm closed, 304 mm wide) on its side so MagSafe and the two Thunderbolt ports stay clear. The slot is 13 × 306 mm with 0.5 mm clearance, a 22 mm MagSafe cutout on the right, and a 140 × 90 mm base that will not tip a 1.24 kg Air. Print in two PETG halves so each fits a 220 mm bed. Open the ready-made model free, resize it on your phone or computer, then download a print-ready STL, 3MF or G-code sliced for your printer, free.Opening the ready-made model and downloading it as STL or 3MF are free, no card; AI changes use credits, from Maker at $7.99 a month.No printer? We print this part and ship it to your door. See its priceUpdated
2
Adjust
Change its numbers in the viewer for free, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use 2 credits per request (1 for a quick edit, 3 for a redesign), paid with a plan from Maker at $7.99 a month, where the first 3 small changes are free.3Print
Download a watertight STL or 3MF free, with your numbers and hand edits, or G-code sliced for your printer at the same price. After an AI change the download is included in every plan (4 credits without one).
Dimensions of the ready-made model (editable)
| Parameter | Value |
|---|---|
| Wall thickness | 2.4 mm |
| Foot width (X) | 90 mm |
| Foot depth (Y) | 140 mm |
| Bottom plate thickness | 6 mm |
| Slot rail height | 30 mm |
| Slot rail length along Y | 100 mm |
| MagSafe cutout diameter | 22 mm |
| Clearance around laptop edge | 0.5 mm |
Example prompt
Design a MacBook Air 13 M4 vertical dock: 13×306 mm slot with 0.5 mm clearance, 22 mm MagSafe cutout, 140×90 mm base, two PETG halves under 220 mm, 2.4 mm walls.
Fit notes
A generic laptop stand pinches MagSafe against the desk. In SpeakCAD you type the thickness with your case, preview the dock in the browser, then download the STL.
Questions people ask about a MacBook Air 13-inch M4 vertical dock
A vertical dock that holds a 13-inch MacBook Air M4 (about 11.3 mm closed, 304 mm wide) on its side so MagSafe and the two Thunderbolt ports stay clear. The slot is 13 × 306 mm with 0.5 mm clearance, a 22 mm MagSafe cutout on the right, and a 140 × 90 mm base that will not tip a 1.24 kg Air. Print in two PETG halves so each fits a 220 mm bed.
Click Open it free on this page and create a free account (no card): the ready-made model opens in your browser, on your phone or computer, nothing to install. Change its numbers in the viewer for free and download a watertight STL or 3MF free, or G-code sliced for your printer at the same price. An AI change in the chat uses 2 credits per request (3 for a redesign), and the download after it is included in every plan (4 credits without one). Start with Maker: 50 credits a month for $7.99, cancel anytime.
On this page: open the ready-made model free in a SpeakCAD account (no card), change any dimension in the viewer, then download the STL or 3MF free, or G-code sliced for your printer at the same price.
A shared STL is modelled for someone else's measurements. Here you open the ready-made model free, change it to your measurements in the viewer, then download a file sized for the part you actually own, free as STL or 3MF.
Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.
No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.
Print it your way
More desk & office
Magic Mouse 2 charging flip standReady-made, opens free. A stand that holds a Magic Mouse 2 / USB-C Magic Mouse on its side so you can charge it without the cable pointing at the ceiling.MacBook Air 15 M4 MagSafe right-side clipReady-made, opens free. A clip that hangs from the right edge of a 15-inch MacBook Air M4 and holds the MagSafe 3 cable at chassis height so the tip does not scratch the aluminium.Mouse bungee with weighted baseReady-made, opens free. A desk accessory that lifts a wired mouse cable off the mat so it never snags or drags.Amazon Echo Show 5 adjustable tilt desk standReady-made, opens free. A stand that raises the Amazon Echo Show 5 and tilts it so the screen is visible when standing at a kitchen counter or desk.ZSA Moonlander tenting legs setReady-made, opens free. A set of four screw-in tenting legs for a ZSA Moonlander that replace the stock 8 mm feet with 15, 25 and 40 mm options.Focusrite Scarlett Solo 4th Gen angled standReady-made, opens free. A 20 degree stand for a Scarlett Solo 4th Gen with a 14 mm USB-C slot and 10 mm foot recesses.