1
Desk & office
Shure MV7+ low-profile desk stand
This is not a fixed STL. SpeakCAD generates the shure mv7+ low-profile desk stand to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Create a low desk stand for a Shure MV7+, 110 mm round base 14 mm thick with a weight pocket, 90 mm post with a 5/8-27 stud on top.
What a shure mv7+ low-profile desk stand is
A short desk stand for the Shure MV7+ and MV7 that screws into the yoke's 5/8-27 thread and puts the capsule about 120 mm above the desk. The base is 110 mm across and 14 mm thick with a pocket for steel washers, and a 90 mm post ends in a printed 5/8-27 stud or a hole for a metal stud. Print the base flat and the post upright in PETG.
The mic uses a 5/8 inch thread, not the 3/8 inch of camera and some boom arms, so a 3/8 stud will not hold it. Open the ready-made model in SpeakCAD for free, change the height in the viewer or the chat, then download the STL.
People also search
shure mv7 stand stlmv7+ desk stand 3d printshure mv7 low profile stand5/8 mic stand base 3d print
Questions people ask about a shure mv7+ low-profile desk stand
A short desk stand for the Shure MV7+ and MV7 that screws into the yoke's 5/8-27 thread and puts the capsule about 120 mm above the desk. The base is 110 mm across and 14 mm thick with a pocket for steel washers, and a 90 mm post ends in a printed 5/8-27 stud or a hole for a metal stud. Print the base flat and the post upright in PETG.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Create a low desk stand for a Shure MV7+, 110 mm round base 14 mm thick with a weight pocket, 90 mm post with a 5/8-27 stud on top.
The mic uses a 5/8 inch thread, not the 3/8 inch of camera and some boom arms, so a 3/8 stud will not hold it. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More desk & office
Whoop 5.0 battery pack nightstand dockA nightstand dock that holds a Whoop 5.0 battery pack (about 29 × 22 × 8 mm) on its contacts with a 30 × 23 mm well 6 mm deep and a 4 mm USB-C slot at the back.Universal Audio Volt 1 desk standA 15 degree stand for a Volt 1 with a 14 mm USB slot.MagSafe 3 cable comb for a desk edgeA comb that parks a MagSafe 3 lead plus two USB-C cables along a 15–32 mm desk edge so the 13 mm MagSafe head sits at MacBook height.IKEA SKOGSTA table cable-clip pairA pair of clips that grab a SKOGSTA table apron (about 30 mm) and park a laptop charger so it does not hang in the walkway.PC case magnetic headset hangerA headset hanger that sticks to the steel side of a PC case with four 20 × 3 mm neodymium disc magnets pressed into a 70 × 70 mm base.Slim bookend pair with anti-slip baseA pair of L-shaped bookends that keep manuals and notebooks upright on a desk or open shelf.