IKEA Skadis holder for Wera Joker wrench set
A stepped rack that clips to an IKEA Skadis pegboard and stands an 11-piece Wera Joker combination wrench set (8 to 19 mm) on edge in size order. Each slot is 2 mm wider than the wrench body, from 6.5 to 11 mm, and 20 mm deep with a 45 degree chamfer at the mouth so the tools drop in one-handed. The rack is 250 mm wide with two Skadis tabs at the 40 mm pitch on each end and a 3 mm back plate; a 10 mm forward lip keeps the open-end heads from sliding out. Print it flat on its back in PETG with 2 mm slot walls.
Wrench sets differ, and a rack cut for Wera Joker widths will not fit Wiha or Gedore. In SpeakCAD you list the sizes, preview the rack in the browser without paying, add a slot for the 22 mm wrench in the chat, and download the STL.
Create a Skadis wrench rack 250 mm wide, 35 mm deep and 30 mm tall with a 3 mm back plate, four 5 by 15 mm Skadis tabs on 40 mm pitch, eleven vertical slots 20 mm deep widening from 6.5 to 11 mm, 2 mm dividers, 45 degree chamfers and a 10 mm front lip.