1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Brackets & mounts
Philips Hue Bridge 2 under-shelf clip
This is not a fixed STL. SpeakCAD generates the philips hue bridge 2 under-shelf clip to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a philips hue bridge 2 under-shelf clip is
A clip that hides a Philips Hue Bridge (about 91 × 91 × 26 mm) under a 12–24 mm shelf with the Ethernet and power ports facing out. The tray is 93 × 28 mm, two 18 mm jaws grab the shelf, and a 16 mm port cutout sits at the front. Print in PETG with 1.6 mm walls.
A Bridge sitting on the router collects dust. In SpeakCAD you type the shelf thickness, preview the clip in the browser without paying, then download the STL.
Example prompt
Model a Hue Bridge 2 under-shelf clip: 93×28 mm tray, jaws for 12–24 mm shelves, 16 mm front port cutout, 1.6 mm PETG walls.
People also search
hue bridge mount stlphilips hue bridge under shelf 3d printhue bridge 2 cliphue bridge hidden mount 3d model
Questions people ask about a philips hue bridge 2 under-shelf clip
A clip that hides a Philips Hue Bridge (about 91 × 91 × 26 mm) under a 12–24 mm shelf with the Ethernet and power ports facing out. The tray is 93 × 28 mm, two 18 mm jaws grab the shelf, and a 16 mm port cutout sits at the front. Print in PETG with 1.6 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model a Hue Bridge 2 under-shelf clip: 93×28 mm tray, jaws for 12–24 mm shelves, 16 mm front port cutout, 1.6 mm PETG walls.
A Bridge sitting on the router collects dust. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
Garmin Edge 840 out-front mount for 31.8 mm barsAn out-front mount that clamps a 31.8 mm road handlebar and holds a Garmin Edge 840 (or the identically sized Edge 540) level with the stem, roughly 75 mm ah…Amazon Eero Pro 6 wall mount bracketA wall bracket for the Amazon Eero Pro 6 mesh node, a 137 x 137 x 48 mm unit whose power and Ethernet ports sit on the back.Meta Quest 3 controller wall hooks pairA pair of wall hooks for the Meta Quest 3 and Quest 3S Touch Plus controllers, which have no tracking ring, so a conventional VR hook has nothing to grab.Sonos Era 300 wall bracket with cable channelA bracket that holds an Era 300 (about 260 mm wide) 40 mm off the wall with a 10 mm cable channel.IKEA LACK shelf wall-bracket coverA cover that hides the stamped LACK shelf bracket (about 50 × 40 mm) so the 30 or 110 cm shelf looks like it floats.Wall bracket for a small bookshelf speakerA wedge-shaped bracket that lifts a compact speaker onto the wall and angles it slightly downward toward the listening position.