Ryobi ONE+ battery wall mount strip for 18V packs
A strip of sockets for Ryobi ONE+ 18V batteries, from the slim 1.5 Ah to the 6 Ah High Performance packs, which all share the same stem. Each socket is a pocket about 46 by 30 mm and 45 mm deep with 0.4 mm clearance and a small inward bump that catches the stem's release latch so packs hang securely stem-up or stem-down. The strip holds four packs on 65 mm centres in a 270 by 70 by 50 mm block with 3 mm walls and two 5 mm keyhole slots so it can be hung on screws without tools. Print in PETG with the open pockets facing up; no supports.
Ryobi's stem is simple, but the exact depth needed to clear the latch differs between generations. In SpeakCAD you describe the packs, preview the strip in the browser without paying, extend it to six sockets in the chat, and download the STL.
Model a battery strip 270 mm long, 70 mm deep and 50 mm tall with four rectangular stem pockets 46 by 30 mm and 45 mm deep on 65 mm centres with 0.4 mm clearance and a 1 mm latch bump 10 mm from the opening, 3 mm walls, and two 5 mm keyhole slots on a 200 mm pitch.