1
Brackets & mounts
Corner bracket for 2020 aluminium extrusion
An L-shaped joining bracket for 20 x 20 mm aluminium extrusion. Each leg is 20 mm wide and 40 mm long with a 5 mm slot for an M5 T-nut bolt, a 6 mm thickness to resist twisting and a triangular web across the inside corner. Small 6 mm ribs under each leg locate in the extrusion slot so the bracket cannot rotate before the bolts are tightened. Print it flat for maximum strength across the corner. Open the ready-made model free, resize it on your phone or computer, then download a print-ready STL, 3MF or G-code sliced for your printer, free.Opening the ready-made model and downloading it as STL or 3MF are free, no card; AI changes use credits, from Maker at $7.99 a month.No printer? We print this part and ship it to your door. See its priceUpdated
2
Adjust
Change its numbers in the viewer for free, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use 2 credits per request (1 for a quick edit, 3 for a redesign), paid with a plan from Maker at $7.99 a month.3Print
Download a watertight STL or 3MF free, with your numbers and hand edits, or G-code sliced for your printer at the same price. After an AI change the download is included in every plan (4 credits without one).
Dimensions of the ready-made model (editable)
| Parameter | Value |
|---|---|
| mm, width of each leg | 20 mm |
| mm, length of each leg from corner | 40 mm |
| mm, thickness of legs | 6 mm |
| mm | 5.3 mm |
| mm | 12 mm |
| mm, distance from corner to slot center along leg | 22 mm |
| mm | 6 mm |
| mm | 2 mm |
Example prompt
Create a corner bracket for 2020 aluminium extrusion. Two legs 20 mm wide, 40 mm long, 6 mm thick at 90 degrees with a triangular gusset. One 5.3 mm slot 12 mm long per leg for M5 bolts, and a 6x2 mm locating rib under each leg.
Fit notes
Whether you use 2020, 2040 or a 3030 series, SpeakCAD draws the bracket to the profile you name and the bolt spacing you want. Open the ready-made model free, change its numbers in the viewer and download the STL or 3MF free; AI changes use credits.
Questions people ask about a corner bracket for 2020 aluminium extrusion
An L-shaped joining bracket for 20 x 20 mm aluminium extrusion. Each leg is 20 mm wide and 40 mm long with a 5 mm slot for an M5 T-nut bolt, a 6 mm thickness to resist twisting and a triangular web across the inside corner. Small 6 mm ribs under each leg locate in the extrusion slot so the bracket cannot rotate before the bolts are tightened. Print it flat for maximum strength across the corner.
Click Open it free on this page and create a free account (no card): the ready-made model opens in your browser, on your phone or computer, nothing to install. Change its numbers in the viewer for free and download a watertight STL or 3MF free, or G-code sliced for your printer at the same price. An AI change in the chat uses 2 credits per request (3 for a redesign), and the download after it is included in every plan (4 credits without one). Start with Maker: 50 credits a month for $7.99, cancel anytime.
On this page: open the ready-made model free in a SpeakCAD account (no card), change any dimension in the viewer, then download the STL or 3MF free, or G-code sliced for your printer at the same price.
A shared STL is modelled for someone else's measurements. Here you open the ready-made model free, change it to your measurements in the viewer, then download a file sized for the part you actually own, free as STL or 3MF.
Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.
No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.
Print it your way
More brackets & mounts
Home Assistant Green wall mountReady-made, opens free. A wall mount that holds a Home Assistant Green with a 14 mm Ethernet cutout and two 4.5 mm holes.Bracket to fit a 2.5 inch SSD in a 3.5 inch bayReady-made, opens free. A rail-style bracket that positions a 2.5 inch SSD inside a 3.5 inch drive bay so the case's standard screws or tool-less clips engage.MagSafe phone holder for shopping cart handleReady-made, opens free. A hook that drops over a 25 to 30 mm shopping cart handle and presents a MagSafe magnet ring so an iPhone 15, 16 or any Qi2 phone hangs from its magnets whil…Google Nest Mini wall hanger with hidden cableReady-made, opens free. A hanger for the Google Nest Mini that uses the screw slot moulded into the back of the speaker.Kärcher K4 pressure washer nozzle holder wall bracketReady-made, opens free. A wall bracket that parks the Vario Power lance, Dirt Blaster nozzle and foam cannon of a Kärcher K4 or K5 pressure washer so they stop rolling around the ga…Sony WH-1000XM5 headphone wall hook with cable slotReady-made, opens free. A slim wall hook designed around the narrow headband of the Sony WH-1000XM5, which is only about 25 mm wide at the top and slides off a chunky gaming-headset…