Kärcher K4 pressure washer nozzle holder wall bracket
A wall bracket that parks the Vario Power lance, Dirt Blaster nozzle and foam cannon of a Kärcher K4 or K5 pressure washer so they stop rolling around the garage floor. Kärcher lances use a 24 mm bayonet neck, so each of the three cups is a 25 mm bore 45 mm deep with a slot for the locking lug, and a 1.5 mm drain hole so water runs out. The bracket is 200 by 70 by 55 mm with 3 mm walls, two 5 mm screw holes on a 150 mm pitch and a 15 mm hook at one end for the trigger gun. Print it cups-up in PETG or ASA for outdoor use.
Kärcher's own holder only stores two items and screws to the machine. In SpeakCAD you describe your accessories, preview the bracket in the browser without paying, ask for a fourth cup or a hose clip in the chat, then download the STL.
Design a wall bracket 200 mm long, 70 mm deep and 55 mm tall with 3 mm walls, three vertical cups 25 mm in diameter and 45 mm deep on 60 mm centres with 6 by 10 mm lug slots and 1.5 mm drain holes, a 15 mm end hook, and two 5 mm screw holes 150 mm apart.