1
Brackets & mounts
iPhone 16 Pro Max car vent mount with MagSafe cutout
A cradle that hooks over a horizontal dashboard vent slat and holds an iPhone 16 Pro Max (163 x 77.6 x 8.25 mm) in portrait or landscape. The pocket measures 165 x 80 mm so a slim Spigen or Otterbox case still drops in, and a 56.5 mm round cutout in the back lets an Apple MagSafe or Anker MagGo puck snap through and charge while you drive. Two 3 mm spring fingers grip vent slats between 2 and 5 mm thick, and the part prints face down with 2.4 mm walls and no supports. Open the ready-made model free, resize it on your phone or computer, then download a print-ready STL, 3MF or G-code sliced for your printer, free.Opening the ready-made model and downloading it as STL or 3MF are free, no card; AI changes use credits, from Maker at $7.99 a month.No printer? We print this part and ship it to your door. See its priceUpdated
2
Adjust
Change its numbers in the viewer for free, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use 2 credits per request (1 for a quick edit, 3 for a redesign), paid with a plan from Maker at $7.99 a month.3Print
Download a watertight STL or 3MF free, with your numbers and hand edits, or G-code sliced for your printer at the same price. After an AI change the download is included in every plan (4 credits without one).
Dimensions of the ready-made model (editable)
| Parameter | Value |
|---|---|
| wall thickness | 2.4 mm |
| phone pocket width (case) | 80 mm |
| phone pocket height (case) | 165 mm |
| phone pocket depth (thickness) | 10 mm |
| bottom lip height | 12 mm |
| MagSafe puck cutout diameter | 56.5 mm |
| center of cutout from bottom of plate | 70 mm |
| backplate thickness | 3 mm |
| spring finger thickness | 3 mm |
| length of spring finger arm | 30 mm |
| width of each finger | 10 mm |
| depth of clip body behind plate | 20 mm |
Example prompt
Design a car vent cradle with a 165 x 80 x 10 mm pocket for an iPhone 16 Pro Max in a slim case, a 56.5 mm cutout centred 70 mm from the bottom for a MagSafe puck, two 3 mm spring fingers gripping 2 to 5 mm vent slats, 2.4 mm walls and a 12 mm bottom lip.
Fit notes
Vent spacing and case thickness change from car to car, which is why downloaded mounts rattle or block the puck. In SpeakCAD you describe your vent, your phone and whether you use a case, preview the mount in the browser, refine the clearance or the puck cutout in the chat, then download the STL or 3MF ready to print.
Questions people ask about an iPhone 16 Pro Max car vent mount with MagSafe cutout
A cradle that hooks over a horizontal dashboard vent slat and holds an iPhone 16 Pro Max (163 x 77.6 x 8.25 mm) in portrait or landscape. The pocket measures 165 x 80 mm so a slim Spigen or Otterbox case still drops in, and a 56.5 mm round cutout in the back lets an Apple MagSafe or Anker MagGo puck snap through and charge while you drive. Two 3 mm spring fingers grip vent slats between 2 and 5 mm thick, and the part prints face down with 2.4 mm walls and no supports.
Click Open it free on this page and create a free account (no card): the ready-made model opens in your browser, on your phone or computer, nothing to install. Change its numbers in the viewer for free and download a watertight STL or 3MF free, or G-code sliced for your printer at the same price. An AI change in the chat uses 2 credits per request (3 for a redesign), and the download after it is included in every plan (4 credits without one). Start with Maker: 50 credits a month for $7.99, cancel anytime.
On this page: open the ready-made model free in a SpeakCAD account (no card), change any dimension in the viewer, then download the STL or 3MF free, or G-code sliced for your printer at the same price.
A shared STL is modelled for someone else's measurements. Here you open the ready-made model free, change it to your measurements in the viewer, then download a file sized for the part you actually own, free as STL or 3MF.
Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.
No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.
Print it your way
More brackets & mounts
Type 2 EV charging plug holster with cable hookReady-made, opens free. A garage holster that receives the Type 2 (Mennekes) plug of a home wallbox or granny cable so the pins stay dry and the cable hangs in a loop below.iPhone 17 Pro MagSafe bike stem mountReady-made, opens free. An out-front bicycle mount that holds an iPhone 17 Pro (about 150 × 72 × 8.8 mm) on a MagSafe ring so the camera bar clears the stem.UniFi Express 7 wall shelfReady-made, opens free. A 140 mm shelf that holds a UniFi Express 7 with a 16 mm WAN cutout and two 4.5 mm holes.DIN rail clip for mounting a small PCBReady-made, opens free. A snap-on clip for standard 35 mm top-hat DIN rail with a flat platform for a small circuit board.reMarkable 2 wall mount holder with Marker slotReady-made, opens free. A wall holder for the reMarkable 2 tablet (187 x 246 x 4.7 mm) that keeps it and its Marker within reach beside a desk or on a kitchen wall for the shopping…Amazon Echo Dot 5th gen outlet shelf mountReady-made, opens free. A small shelf that sits over a wall outlet and carries an Amazon Echo Dot 5th gen, a 100 mm sphere-ish speaker 89 mm tall weighing about 300 g, so it takes n…