Brackets & mounts

reMarkable 2 wall mount holder with Marker slot

A wall holder for the reMarkable 2 tablet (187 x 246 x 4.7 mm) that keeps it and its Marker within reach beside a desk or on a kitchen wall for the shopping list. The bottom rail is 190 mm long with a 6 mm channel 12 mm deep, giving 0.65 mm clearance per side for the bare tablet, and a 40 mm gap in the middle for the USB-C cable. A 10 mm bore beside the rail holds the Marker upright, two 4.5 mm screw holes take wall plugs, walls are 3 mm and it prints on its back.

The reMarkable is thinner than any iPad, so tablet holders downloaded from a general site let it wobble. In SpeakCAD you describe the tablet, the Marker and whether a Folio is fitted, preview the holder free in the browser, adjust the channel width in the chat, then download the STL.

Get it nowGenerate and preview for free, in your browser. A download costs 2 credits.

Model a wall holder for a reMarkable 2 with a 190 mm long bottom rail having a 6 mm wide, 12 mm deep channel and a 40 mm central cable gap, a 10 mm diameter 60 mm deep Marker bore on the right side, 3 mm walls and two 4.5 mm countersunk screw holes.

Change any number to match what you measured. The AI keeps the rest of the design consistent, and small follow-up edits after a download are free.

More brackets & mounts

Google Nest Mini wall hanger with hidden cableA hanger for the Google Nest Mini that uses the screw slot moulded into the back of the speaker.Ryobi ONE+ battery wall mount strip for 18V packsA strip of sockets for Ryobi ONE+ 18V batteries, from the slim 1.5 Ah to the 6 Ah High Performance packs, which all share the same stem.Owlet Dream Sock base station wall mountA cradle that holds the Owlet Dream Sock or Smart Sock 3 base station on the nursery wall at eye level so the glowing ring is visible from the door and the c…Curtain rod bracket for a 25 mm poleA replacement or extra bracket for a 25 mm curtain pole when the set came with too few or one broke.Adjustable support bracket for a sagging graphics cardA telescoping pillar that stands on the PC case floor or power supply shroud and props up the far end of a heavy graphics card so it stops drooping in the PC…Wahoo ELEMNT Bolt out-front mount for 35 mm barsOversized 35 mm handlebars are common on modern gravel and mountain bikes, yet most Wahoo mounts ship for 31.8 mm only.

Make your remarkable 2 wall mount holder with marker slot now

Nothing to install and no CAD skills needed. Describe it, watch it render, download the STL or 3MF and print it tonight.

Get it nowBrowse the library
Looking for a ready-made version? Check the marketplace, where makers sell finished, rated models for credits.