Google Nest Mini wall hanger with hidden cable
A hanger for the Google Nest Mini that uses the screw slot moulded into the back of the speaker. The Nest Mini is a 98 mm disc, 42 mm tall, with a barrel power jack on the underside. The hanger is a 40 x 25 mm wall plate with a 5 mm tall peg matching the rear slot, a 30 mm arm that spaces the speaker off the wall and a 10 mm channel behind the arm that guides the cable straight down. A 4 mm countersunk hole and a 3M strip recess let you pick screws or adhesive. Walls are 3 mm and the part prints flat on the wall face.
The official slot position only lines up when the peg is measured for it, which a generic download rarely gets right. In SpeakCAD you describe the speaker and cable direction, preview the hanger free in the browser, add a plug holder or angle the arm in the chat, and download the STL.
Design a wall hanger for a Google Nest Mini speaker 98 mm diameter and 42 mm tall with a 40 x 25 mm wall plate, a 5 mm tall keyed peg for the rear mounting slot, a 30 mm standoff arm, a 10 mm wide vertical cable channel, one 4 mm countersunk screw hole and a 3M adhesive recess.