Brackets & mounts

Wall mount bracket for a Wi-Fi router

This bracket gets a flat router off the floor and onto the wall behind the TV or in a utility closet, keeping cables tidy. It is a shallow tray with two side lips that grip the router body, an open front for airflow and a slot at the bottom for power and Ethernet leads. Use a 2.5 mm tray floor, 3 mm lips with 0.5 mm clearance around the device, two keyhole slots for wall screws and vent cut-outs in the back plate.

Routers are all slightly different sizes, so a generic download rarely fits. With SpeakCAD you paste the width, depth and height from the spec sheet and the tray is sized around them. Need the cable slot moved or the lips taller? Ask in the chat and preview again for free before you download.

Get it nowGenerate and preview for free, in your browser. A download costs 2 credits.

Design a wall bracket for a router measuring 220x160x35 mm. Shallow tray with 2.5 mm floor, 3 mm side lips 20 mm tall with 0.5 mm clearance, open front, 30x12 mm cable slot at the bottom, two keyhole slots 100 mm apart and vent holes in the back plate.

Change any number to match what you measured. The AI keeps the rest of the design consistent, and small follow-up edits after a download are free.

More brackets & mounts

Wyze Cam v3 corner wall mount with rain hoodA corner bracket for the Wyze Cam v3, a 51 x 53 x 58 mm camera with a 1/4 inch-20 thread in its base.IKEA Billy bookcase anti-tip wall bracketA low-profile bracket that ties the top of an IKEA Billy bookcase to the wall and replaces the flimsy strap or a lost original fitting.Sony WH-1000XM5 headphone wall hook with cable slotA slim wall hook designed around the narrow headband of the Sony WH-1000XM5, which is only about 25 mm wide at the top and slides off a chunky gaming-headset…Corner bracket for 2020 aluminium extrusionAn L-shaped joining bracket for 20 x 20 mm aluminium extrusion.MagSafe phone holder for shopping cart handleA hook that drops over a 25 to 30 mm shopping cart handle and presents a MagSafe magnet ring so an iPhone 15, 16 or any Qi2 phone hangs from its magnets whil…Ski and snowboard wall rack bracketA wall bracket for a pair of skis or a snowboard, with two 150 mm arms that hang skis tips-up by the brakes or bindings, or a single 30 mm slot version that…

Make your wall mount bracket for a wi-fi router now

Nothing to install and no CAD skills needed. Describe it, watch it render, download the STL or 3MF and print it tonight.

Get it nowBrowse the library
Looking for a ready-made version? Check the marketplace, where makers sell finished, rated models for credits.