Meta Quest 3 headset wall hanger with strap rest
A wall hanger that carries a Meta Quest 3 (184 x 160 x 98 mm with the strap folded, about 515 g) by its facial interface bar, with a second, higher arm that supports the head strap so it does not stretch out of shape between sessions. The main cradle is 110 mm wide and follows a 190 mm radius so the headset rests on the padded gasket only, with 3 mm fillets, and the strap rest is a 30 mm wide bar 80 mm above it. A 25 mm cable notch at the side takes the Link cable. It prints on its 3 mm back plate with 2.5 mm walls; two 4.5 mm screw holes at 60 mm spacing accept drywall anchors.
Generic VR hangers hold the headset by the lenses and leave the strap dangling. Give SpeakCAD your strap type, Elite or standard, and lens-guard thickness, preview the hanger in the browser without paying, refine in the chat and download the STL.
Design a Quest 3 wall hanger with a 110 mm wide headset cradle on a 190 mm radius with 3 mm fillets, a 30 mm wide strap rest bar 80 mm above it projecting 60 mm, a 25 mm cable notch, a 3 mm back plate with two 4.5 mm countersunk holes 60 mm apart, and 2.5 mm walls.