Wall Control pegboard hook for Milwaukee M12 tools
A cradle that hooks onto Wall Control metal pegboard and hangs Milwaukee M12 tools such as the Fuel drill, impact driver or ratchet by their battery foot, with the tool body resting against a padded bumper. Wall Control panels have 1/4 inch (6.4 mm) round holes on a 1 inch grid plus horizontal slots, so the mount uses two 6 mm pins 25.4 mm apart with a 3 mm downward hook. The cradle is a 60 by 35 mm shelf with a 45 mm deep pocket sized to the M12 battery outline plus 0.5 mm, 3 mm walls, and prints upright in PETG with a small support under the shelf.
Off-the-shelf Wall Control hooks are made for hammers, not for a tool with a battery hanging under it. In SpeakCAD you describe the tool, preview the cradle in the browser without paying, ask for an M18 version in the chat, and download the STL.
Design a pegboard tool cradle with a 50 by 60 mm back plate 4 mm thick, two 6 mm pins 25.4 mm apart with 3 mm downward hooks, a shelf 60 mm wide and 35 mm deep holding a 45 by 22 mm pocket 20 mm deep with 0.5 mm clearance, 3 mm walls and a 4 mm shelf fillet.