1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Brackets & mounts
DJI Osmo Pocket 3 desk cradle with tripod thread
This is not a fixed STL. SpeakCAD generates the dji osmo pocket 3 desk cradle with tripod thread to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a dji osmo pocket 3 desk cradle with tripod thread is
A weighted desk cradle for a DJI Osmo Pocket 3 (about 140 × 42 × 34 mm) with a 1/4-20 brass-insert boss underneath and a 16 mm well that the handle drops into. A 8 mm front cutout leaves the touchscreen free, and a 12 mm rear slot routes the USB-C cable. Print the cradle in PETG with a 8 mm floor so it stays put.
Pocket 2 cradles leave the Pocket 3's wider gimbal rocking. Tell SpeakCAD whether you use the Creator Combo handle, preview the cradle in the browser without paying, then download the STL.
Example prompt
Model an Osmo Pocket 3 cradle 50×40×30 mm with a 16 mm handle well, 8 mm screen cutout, 12 mm USB-C slot, 1/4-20 insert boss and 8 mm PETG floor.
People also search
osmo pocket 3 stand stldji pocket 3 desk cradle 3d printosmo pocket 3 tripod mountdji pocket 3 holder 3d model
Questions people ask about a dji osmo pocket 3 desk cradle with tripod thread
A weighted desk cradle for a DJI Osmo Pocket 3 (about 140 × 42 × 34 mm) with a 1/4-20 brass-insert boss underneath and a 16 mm well that the handle drops into. A 8 mm front cutout leaves the touchscreen free, and a 12 mm rear slot routes the USB-C cable. Print the cradle in PETG with a 8 mm floor so it stays put.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model an Osmo Pocket 3 cradle 50×40×30 mm with a 16 mm handle well, 8 mm screen cutout, 12 mm USB-C slot, 1/4-20 insert boss and 8 mm PETG floor.
Pocket 2 cradles leave the Pocket 3's wider gimbal rocking. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
Bosch 18V GDR wall holsterA holster that parks a Bosch 18V GDR impact (about 140 mm) on a 4.5 mm hole pair.Adjustable support bracket for a sagging graphics cardA telescoping pillar that stands on the PC case floor or power supply shroud and props up the far end of a heavy graphics card so it stops drooping in the PC…Hex dumbbell wall mount holder bracketA pair of wall brackets that cradle a rubber hex dumbbell by its handle so a small home gym stays off the floor.IKEA Skadis holder for Wera Joker wrench setA stepped rack that clips to an IKEA Skadis pegboard and stands an 11-piece Wera Joker combination wrench set (8 to 19 mm) on edge in size order.iPhone 17 Pro MagSafe bike stem mountAn out-front bicycle mount that holds an iPhone 17 Pro (about 150 × 72 × 8.8 mm) on a MagSafe ring so the camera bar clears the stem.HomePod mini 2 outlet shelfA shelf that hangs a HomePod mini 2 from a US or EU outlet so it does not sit on the kitchen wet zone, 100 mm well and a 20 mm cable drop.