Brackets & mounts

Bracket to fit a 2.5 inch SSD in a 3.5 inch bay

A rail-style bracket that positions a 2.5 inch SSD inside a 3.5 inch drive bay so the case's standard screws or tool-less clips engage. The frame is 101.6 mm wide and 147 mm long to match the 3.5 inch form factor, with side rails carrying bay holes at 41.6 mm from the front and 101.6 mm apart, plus a recessed pocket where the SSD screws in from underneath on its 76.6 x 61.7 mm hole pattern. Walls of 3 mm and an open centre keep it light and airy.

Many cases have odd screw positions or need the drive offset toward the connector side; with SpeakCAD you specify those offsets rather than filing a downloaded bracket. Ask for the SSD shifted 10 mm, or for two stacked drives, and preview each version free before spending credits.

Get it nowGenerate and preview for free, in your browser. A download costs 2 credits.

Create a 2.5 to 3.5 inch drive adapter bracket. Outer frame 101.6x147x8 mm with 3 mm walls and open centre. Side holes for 3.5 inch bay screws at 41.6 mm and 101.6 mm from the front edge. Bottom pocket with four 3.2 mm holes at 76.6x61.7 mm spacing.

Change any number to match what you measured. The AI keeps the rest of the design consistent, and small follow-up edits after a download are free.

More brackets & mounts

Wall mount clips for a power stripA pair of C-shaped clips that screw to a wall or cabinet side and let a power strip slide in and stay put, so it stops dangling from its cord.Adjustable support bracket for a sagging graphics cardA telescoping pillar that stands on the PC case floor or power supply shroud and props up the far end of a heavy graphics card so it stops drooping in the PC…Garmin Edge 840 out-front mount for 31.8 mm barsAn out-front mount that clamps a 31.8 mm road handlebar and holds a Garmin Edge 840 (or the identically sized Edge 540) level with the stem, roughly 75 mm ah…Sonos Roam wall holder with USB-C charging cutoutA cradle that holds a Sonos Roam upright on a bathroom or kitchen wall while a USB-C cable stays plugged into the back.Makita 18V LXT battery holder wall mount railA wall-mounted rail that holds Makita 18V LXT batteries (BL1830, BL1850, BL1860B) by their slide rails, exactly as a tool does, so the pack clicks in and the…Chuckit ball launcher wall mount with ball holderA garage or hallway mount that holds a Chuckit Classic 26M launcher upright by its handle and keeps two tennis balls ready beside it.

Make your bracket to fit a 2.5 inch ssd in a 3.5 inch bay now

Nothing to install and no CAD skills needed. Describe it, watch it render, download the STL or 3MF and print it tonight.

Get it nowBrowse the library
Looking for a ready-made version? Check the marketplace, where makers sell finished, rated models for credits.