Kettlebell wall rack hook for garage gym
A hook that hangs a light kettlebell (up to about 12 kg) by its handle against a garage wall, freeing floor space beside the squat rack. The hook has a 36 mm wide throat for the 33 to 35 mm handles used by Rogue, Kettlebell Kings and Decathlon Corength bells, a 45 mm deep hook, a 100 mm back plate with three countersunk M6 holes for stud or plywood mounting, and 8 mm walls with a full-depth gusset. Print it on its side so the hook is one continuous set of layers, in PETG or ASA at 50 percent infill.
Kettlebell handles are not standardised, so a downloaded hook is either too tight to lift the bell off or so loose it bangs the wall. Give SpeakCAD your handle diameter and bell weight, preview the hook free in the browser, adjust the depth in the chat, then download the STL.
Model a wall hook for a kettlebell with a 36 mm wide, 45 mm deep hooked throat for a 34 mm handle, a 100 x 60 mm back plate with three countersunk 6.5 mm holes, 8 mm walls, a full-depth gusset and 2 mm radius fillets.