1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Brackets & mounts
Philips Hue Go 2 wall shelf with USB-C
This is not a fixed STL. SpeakCAD generates the philips hue go 2 wall shelf with usb-c to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a philips hue go 2 wall shelf with usb-c is
A 160 mm shelf that holds a Hue Go 2 and drops a USB-C cable through a 8 mm hole. Two 4.5 mm holes sit on 80 mm centres. Print in PETG.
The Go on a window sill falls. Tell SpeakCAD the cable, preview the shelf in the browser for free, then download the STL.
Example prompt
Create a Hue Go 2 shelf 160×80×20 mm, 8 mm USB-C hole, two 4.5 mm holes on 80 mm centres, 2 mm PETG.
People also search
hue go 2 shelf stlphilips hue go wall mount 3d printhue go 2 usb-c shelfhue go wall holder 3d model
Questions people ask about a philips hue go 2 wall shelf with usb-c
A 160 mm shelf that holds a Hue Go 2 and drops a USB-C cable through a 8 mm hole. Two 4.5 mm holes sit on 80 mm centres. Print in PETG.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Create a Hue Go 2 shelf 160×80×20 mm, 8 mm USB-C hole, two 4.5 mm holes on 80 mm centres, 2 mm PETG.
The Go on a window sill falls. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
Wall mount plate for a Raspberry Pi 4A flat carrier plate that screws to a wall or cabinet and holds a bare Raspberry Pi 4 on standoffs, keeping all ports reachable and the board open for cooling.iPad mini car headrest mount for back seatA rear-seat holder for the iPad mini (195.4 x 134.8 x 6.3 mm) that clamps to the two headrest posts so children can watch films in landscape.UniFi U6 Lite ceiling tile adapter plateA plate that lets a Ubiquiti UniFi U6 Lite access point clip to a suspended ceiling grid instead of being screwed through a soft tile.Owlet Dream Sock base station wall mountA cradle that holds the Owlet Dream Sock or Smart Sock 3 base station on the nursery wall at eye level so the glowing ring is visible from the door and the c…Dyson V15 Detect wand wall holsterA wall holster that parks a V15 Detect wand and two tools next to the official dock, which only holds one.Philips Hue Dimmer v2 magnetic wall plateA plate that holds a Hue Dimmer switch v2 (about 92 × 35 mm) on a steel door or fridge so it is not taped to the wall.