1
Brackets & mounts
Hyundai Ioniq 5 cup holder MagSafe mount
This is not a fixed STL. SpeakCAD generates the hyundai ioniq 5 cup holder magsafe mount to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model an Ioniq 5 cup holder MagSafe mount, 74 mm base with TPU sleeve, 12 mm stem 110 mm tall, 57 mm puck cup tilted 15 degrees, 6 mm cable channel.
What a hyundai ioniq 5 cup holder magsafe mount is
A phone mount that plugs into one of the Ioniq 5 Universal Island cup holders and raises a MagSafe puck (about 56 mm across) to screen height. The base is about 74 mm across with a 1 mm TPU sleeve to take up play, the 12 mm stem is 110 mm tall, and the 57 mm puck cup tilts 15 degrees toward the driver with a 6 mm cable channel. Print the base upright and the cup face-down in PETG or ASA.
The Ioniq 6 console cup holders are a different size, so measure yours and tell the chat. Open the ready-made mount in SpeakCAD for free, change any millimetre in the viewer or the chat, then download the STL.
People also search
ioniq 5 phone mounthyundai ioniq 5 magsafe mount stlioniq 5 cup holder phone holderioniq 5 accessories 3d print
Questions people ask about a hyundai ioniq 5 cup holder magsafe mount
A phone mount that plugs into one of the Ioniq 5 Universal Island cup holders and raises a MagSafe puck (about 56 mm across) to screen height. The base is about 74 mm across with a 1 mm TPU sleeve to take up play, the 12 mm stem is 110 mm tall, and the 57 mm puck cup tilts 15 degrees toward the driver with a 6 mm cable channel. Print the base upright and the cup face-down in PETG or ASA.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model an Ioniq 5 cup holder MagSafe mount, 74 mm base with TPU sleeve, 12 mm stem 110 mm tall, 57 mm puck cup tilted 15 degrees, 6 mm cable channel.
The Ioniq 6 console cup holders are a different size, so measure yours and tell the chat. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
Quad Lock wall mount plate for shower or workshopA flat plate with a Quad Lock style twist-lock recess so any phone in a Quad Lock case snaps onto a shower wall, a workshop board or the side of a fridge.Ryobi ONE+ battery wall mount strip for 18V packsA strip of sockets for Ryobi ONE+ 18V batteries, from the slim 1.5 Ah to the 6 Ah High Performance packs, which all share the same stem.Dyson Gen5detect crevice-tool clipA clip that holds the Gen5detect crevice tool on the wand so it does not live in the other room.Bosch 18V GDR wall holsterA holster that parks a Bosch 18V GDR impact (about 140 mm) on a 4.5 mm hole pair.Dyson V8 wall dock replacementA replacement wall dock for the Dyson V8, which holds the wand by its top end and routes the charger to the machine.Steam Deck OLED car headrest mountA back-seat headrest mount for a Steam Deck OLED (298 × 117 × 49 mm) that clamps both headrest posts (usually 12 to 14 mm, 140 to 160 mm apart) and holds the…