Xbox Series S wall mount bracket vertical
A two-piece bracket set that hangs an Xbox Series S (275 x 151 x 63.5 mm, 1.93 kg) vertically on the wall next to the TV with its big round fan facing the room. The lower cradle is a 66 mm wide U-channel 155 mm long with 0.5 mm clearance and 4 mm ventilation slots underneath, and the upper clip is a shallow 66 mm hook that stops the console tipping while leaving the top vents and rear ports completely open. Both parts have 4 mm back plates, each with two 5 mm screw holes for M5 drywall anchors, and print flat on their backs with 3 mm walls and 30 percent infill for stiffness.
Bracket kits sold for the Series X are too wide for the S and choke its exhaust. With SpeakCAD you describe your exact console, the wall material and how much airflow gap you want, preview the brackets in the browser without paying, refine them in the chat and download the STL.
Design a two-piece Xbox Series S vertical wall mount: a lower U-channel cradle 66 mm wide, 155 mm long and 40 mm tall with 0.5 mm clearance and four 4 mm vent slots, an upper 66 mm retaining hook 20 mm deep, 4 mm back plates each with two 5.5 mm screw holes, 3 mm walls.