iPad 10th gen treadmill console holder clip
A cradle that hooks over the top lip of a treadmill or exercise bike console and holds an iPad 10th generation (248.6 x 179.5 x 7 mm) in landscape at a 15 degree tilt. The bottom channel is 250 mm long and 8.5 mm wide with a 30 mm centre gap for the USB-C cable, two 30 mm side arms stop the tablet sliding, and the rear hook is adjustable in the prompt to suit console lips between 20 and 40 mm thick. Walls are 3 mm and the part prints on its back.
Treadmill consoles vary in shape far more than tablets do, so a downloaded holder rarely sits flat. In SpeakCAD you describe the console lip, the tablet and any case, preview the holder free in the browser, refine the hook depth in the chat, then download the STL and get back to training.
Design a treadmill console cradle for an iPad 10th gen with a 250 mm long, 8.5 mm wide bottom channel tilted 15 degrees, a 30 mm cable gap in the middle, two 30 mm tall side arms, a rear hook for a 30 mm thick console lip, 3 mm walls and 15 mm deep hook return.