UniFi U6 Lite ceiling tile adapter plate
A plate that lets a Ubiquiti UniFi U6 Lite access point clip to a suspended ceiling grid instead of being screwed through a soft tile. The U6 Lite is 160 mm in diameter and 32.65 mm tall and twists onto the bracket in its box, so this plate reproduces that bracket's twist-lock tabs on a 180 x 180 mm square, 3 mm thick, with two spring clips on the back that grip a 24 mm T-bar (or 15 mm on request). A 25 mm hole passes the Ethernet cable and 1.5 mm ribs keep the plate from bowing. Print it flat on the tile side without supports.
Grid profiles differ between countries and tile mounts often sag over time, which a measured clip avoids. In SpeakCAD you describe the grid, preview the plate free in the browser, swap to a U6 Pro or U7 pattern in the chat, and download the STL.
Design a 180 x 180 x 3 mm ceiling tile adapter plate for a UniFi U6 Lite access point 160 mm diameter with three twist-lock tabs matching the stock bracket, two rear spring clips for a 24 mm T-bar grid, a 25 mm cable hole and 1.5 mm stiffening ribs.