Brackets & mounts

Samsung Galaxy Tab S9 wall mount bracket with charging slot

A wall bracket that turns a Samsung Galaxy Tab S9 (254.3 x 165.8 x 5.9 mm) into a smart home panel or family calendar. The bottom rail is 200 mm long with a 7.5 mm channel and a 14 x 9 mm notch centred for the USB-C plug, so the tablet charges while mounted, and two hooked top clips hold the upper edge with 0.5 mm play. Four 4.5 mm screw holes suit standard plasterboard plugs, walls are 3 mm, and every part prints flat on its back.

Downloaded tablet mounts are usually drawn for iPads and leave the Tab S9 loose or cover its charging port. In SpeakCAD you name the tablet, say whether it wears a case, and the generator builds the rail and clips to match. Preview it free in the browser, refine the notch position in the chat, then download the STL.

Get it nowGenerate and preview for free, in your browser. A download costs 2 credits.

Model a wall bracket for a Samsung Galaxy Tab S9 with a 200 mm long bottom rail having a 7.5 mm wide, 12 mm deep channel and a centred 14 x 9 mm USB-C notch, two top clips 20 mm wide with a 6 mm hook, 3 mm walls and four 4.5 mm screw holes.

Change any number to match what you measured. The AI keeps the rest of the design consistent, and small follow-up edits after a download are free.

More brackets & mounts

Wall mount for 18 V power tool batteriesA wall rail that spare 18 V slide-on battery packs click onto, so they stop rolling around a drawer and are visible when you need one.Garmin Edge 840 out-front mount for 31.8 mm barsAn out-front mount that clamps a 31.8 mm road handlebar and holds a Garmin Edge 840 (or the identically sized Edge 540) level with the stem, roughly 75 mm ah…Sonos Roam wall holder with USB-C charging cutoutA cradle that holds a Sonos Roam upright on a bathroom or kitchen wall while a USB-C cable stays plugged into the back.Makita 18V LXT battery holder wall mount railA wall-mounted rail that holds Makita 18V LXT batteries (BL1830, BL1850, BL1860B) by their slide rails, exactly as a tool does, so the pack clicks in and the…Chuckit ball launcher wall mount with ball holderA garage or hallway mount that holds a Chuckit Classic 26M launcher upright by its handle and keeps two tennis balls ready beside it.Wall mount clips for a power stripA pair of C-shaped clips that screw to a wall or cabinet side and let a power strip slide in and stay put, so it stops dangling from its cord.

Make your samsung galaxy tab s9 wall mount bracket with charging slot now

Nothing to install and no CAD skills needed. Describe it, watch it render, download the STL or 3MF and print it tonight.

Get it nowBrowse the library
Looking for a ready-made version? Check the marketplace, where makers sell finished, rated models for credits.