Hatch Rest sound machine wall shelf with cable channel
A small shelf that mounts a Hatch Rest or Rest+ sound machine on the nursery wall out of reach of a toddler while keeping the top touch ring accessible. The Hatch Rest is about 104 mm in diameter and 165 mm tall, so the shelf has a 106 mm round recess 4 mm deep that stops it sliding, a 10 mm front lip and a 12 mm channel down the back for the USB power cable. The back plate is 120 by 80 mm with two keyhole slots, and a 45 degree gusset carries the shelf. Walls are 4 mm; print the back plate flat with supports under the gusset.
The Rest 2nd Gen, Rest+ and Rest Go differ in base diameter, so a shelf generated to your unit holds it without rattling. In SpeakCAD you name the model and wall fixings, preview the shelf in the browser at no cost, add a night light cutout in the chat and download the STL or 3MF.
Create a wall shelf with a 120 x 80 mm back plate 4 mm thick with two 5 mm keyhole slots, a 130 x 130 mm shelf with a 106 mm recess 4 mm deep and a 10 mm front lip for a Hatch Rest sound machine, a 12 mm rear cable channel and a 45 degree gusset.