Brackets & mounts

Under-shelf bracket for a cable tray

A J-shaped bracket that screws to the underside of a shelf or table and cradles a bundle of cables or a slim power strip out of sight. The channel is 60 mm wide and 40 mm deep with a 3 mm wall, an outward flare at the lip so cables drop in easily, and a 30 mm top flange with two 4 mm holes for wood screws. Two or three brackets spaced 400 mm apart carry a full run, and the open top means nothing has to be threaded through.

Bundles vary from a couple of thin leads to a fat cluster with adapters, and SpeakCAD sizes the channel to whatever you describe. Preview the profile for free, then ask for a deeper trough, a zip-tie slot or a wall-mounted version. Each revision is a single sentence away.

Get it nowGenerate and preview for free, in your browser. A download costs 2 credits.

Create a J-shaped under-shelf cable bracket. Channel 60 mm wide, 40 mm deep, 3 mm walls, 25 mm long. Lip flared outward 5 mm. Top flange 30 mm wide with two 4 mm countersunk holes 40 mm apart. Add two 4x2 mm zip tie slots in the floor.

Change any number to match what you measured. The AI keeps the rest of the design consistent, and small follow-up edits after a download are free.

More brackets & mounts

MagSafe phone holder for shopping cart handleA hook that drops over a 25 to 30 mm shopping cart handle and presents a MagSafe magnet ring so an iPhone 15, 16 or any Qi2 phone hangs from its magnets whil…Ski and snowboard wall rack bracketA wall bracket for a pair of skis or a snowboard, with two 150 mm arms that hang skis tips-up by the brakes or bindings, or a single 30 mm slot version that…Wyze Cam v3 corner wall mount with rain hoodA corner bracket for the Wyze Cam v3, a 51 x 53 x 58 mm camera with a 1/4 inch-20 thread in its base.IKEA Billy bookcase anti-tip wall bracketA low-profile bracket that ties the top of an IKEA Billy bookcase to the wall and replaces the flimsy strap or a lost original fitting.Sony WH-1000XM5 headphone wall hook with cable slotA slim wall hook designed around the narrow headband of the Sony WH-1000XM5, which is only about 25 mm wide at the top and slides off a chunky gaming-headset…Corner bracket for 2020 aluminium extrusionAn L-shaped joining bracket for 20 x 20 mm aluminium extrusion.

Make your under-shelf bracket for a cable tray now

Nothing to install and no CAD skills needed. Describe it, watch it render, download the STL or 3MF and print it tonight.

Get it nowBrowse the library
Looking for a ready-made version? Check the marketplace, where makers sell finished, rated models for credits.