1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Brackets & mounts
Peloton Guide camera shelf riser
This is not a fixed STL. SpeakCAD generates the peloton guide camera shelf riser to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a peloton guide camera shelf riser is
A riser that lifts a Peloton Guide (about 140 × 50 × 25 mm) 40 mm above a TV console so the camera sees over a soundbar. The well is 142 × 27 mm with 0.4 mm clearance, the riser is 160 × 60 × 40 mm, and a 14 mm cable slot drops out the back. Print in one piece in PLA with 2 mm walls.
A generic camera riser lets the Guide slide off. Tell SpeakCAD the soundbar height, preview the riser in the browser without paying, then download the STL.
Example prompt
Model a Peloton Guide riser 160×60×40 mm with a 142×27 mm well, 0.4 mm clearance, 14 mm rear cable slot and 2 mm walls.
People also search
peloton guide stand stlpeloton guide camera riser 3d printpeloton guide soundbar riserpeloton guide shelf 3d model
Questions people ask about a peloton guide camera shelf riser
A riser that lifts a Peloton Guide (about 140 × 50 × 25 mm) 40 mm above a TV console so the camera sees over a soundbar. The well is 142 × 27 mm with 0.4 mm clearance, the riser is 160 × 60 × 40 mm, and a 14 mm cable slot drops out the back. Print in one piece in PLA with 2 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model a Peloton Guide riser 160×60×40 mm with a 142×27 mm well, 0.4 mm clearance, 14 mm rear cable slot and 2 mm walls.
A generic camera riser lets the Guide slide off. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
Kettlebell wall rack hook for garage gymA hook that hangs a light kettlebell (up to about 12 kg) by its handle against a garage wall, freeing floor space beside the squat rack.Wall Control pegboard hook for Milwaukee M12 toolsA cradle that hooks onto Wall Control metal pegboard and hangs Milwaukee M12 tools such as the Fuel drill, impact driver or ratchet by their battery foot, wi…Pixel 10 Pro XL out-front bike mountAn out-front handlebar mount for a Pixel 10 Pro XL (about 163 × 77 × 8.6 mm) with a 22.2 / 31.8 mm clamp and a 70 mm deep cradle that clears the Camera Bar.Apple TV 4K 3rd gen HDMI shelfA 100 mm shelf that hides a 3rd-gen Apple TV 4K behind a TV with a 16 mm HDMI/power cutout and two 4.5 mm holes.Makita 18V LXT impact wall holsterA holster that parks an 18V LXT impact (about 130 mm without battery) on a 4.5 mm hole pair.Corner bracket for 2020 aluminium extrusionAn L-shaped joining bracket for 20 x 20 mm aluminium extrusion.