1
Brackets & mounts
Lenovo Legion Go S wall mount
This is not a fixed STL. SpeakCAD generates the lenovo legion go s wall mount to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Model a Legion Go S wall mount, 240×40 mm plate, two grip cups 45 mm wide 46 mm deep, open top, three 4 mm countersunk holes, 3 mm walls.
What a lenovo legion go s wall mount is
A wall mount for the Lenovo Legion Go S (about 300 × 128 mm, about 44 mm deep at the grips) with two grip cups 45 mm wide and 46 mm deep so the handheld hangs screen out with its top USB-C ports free. The plate is 240 × 40 mm with three 4 mm countersunk holes. Print in PETG, 3 mm walls, 40 % infill.
A Steam Deck OLED is 49 mm deep and slightly shorter, so it will not seat properly. Open the mount in SpeakCAD without paying, adjust it in the chat or the viewer, then download the STL.
People also search
legion go s wall mount stllegion go s holder 3d printlegion go s wall cradlelenovo legion go s wall mount
Questions people ask about a lenovo legion go s wall mount
A wall mount for the Lenovo Legion Go S (about 300 × 128 mm, about 44 mm deep at the grips) with two grip cups 45 mm wide and 46 mm deep so the handheld hangs screen out with its top USB-C ports free. The plate is 240 × 40 mm with three 4 mm countersunk holes. Print in PETG, 3 mm walls, 40 % infill.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Model a Legion Go S wall mount, 240×40 mm plate, two grip cups 45 mm wide 46 mm deep, open top, three 4 mm countersunk holes, 3 mm walls.
A Steam Deck OLED is 49 mm deep and slightly shorter, so it will not seat properly. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
reMarkable Paper Pro wall dock with Marker slotA wall dock that holds a reMarkable Paper Pro (about 274 × 197 × 5.1 mm) and parks the Marker Plus in a 12 mm bore 140 mm deep.IKEA LACK wall-shelf hidden bracketA hidden bracket that replaces the stamped LACK shelf hardware with a 120 × 20 × 16 mm French-cleat style plate so a 110 cm LACK shelf sits tighter to the wall.Fiber ONT adjustable wall bracketA wall bracket for a fiber ONT that holds the box on edge above the fiber outlet so the patch lead does not bend tighter than its 30 mm minimum radius.Garmin Edge 130 Plus stem top cap mountA stem top cap with a built-in Garmin quarter-turn tab that holds a small Edge 130 Plus right above the steerer.Bracket to fit a 2.5 inch SSD in a 3.5 inch bayA rail-style bracket that positions a 2.5 inch SSD inside a 3.5 inch drive bay so the case's standard screws or tool-less clips engage.Sonos Roam wall holder with USB-C charging cutoutA cradle that holds a Sonos Roam upright on a bathroom or kitchen wall while a USB-C cable stays plugged into the back.