1
Brackets & mounts
Samsung Galaxy Z Fold 6 car vent mount folded
A vent cradle sized for the Samsung Galaxy Z Fold 6 when it is closed (153.5 x 68.1 x 12.1 mm), the thick form factor that most universal phone mounts cannot grip. The pocket is 155 x 70 x 14 mm with rounded corners, a 12 mm bottom lip cut by a 14 x 9 mm slot for the USB-C cable, and a rear opening so the hinge side rests fully supported. Two 3 mm spring fingers hook over vent slats from 2 to 5 mm thick; walls are 2.4 mm and the cradle prints face down. Open the ready-made model free, resize it on your phone or computer, then download a print-ready STL, 3MF or G-code sliced for your printer, free.Opening the ready-made model and downloading it as STL or 3MF are free, no card; AI changes use credits, from Maker at $7.99 a month.No printer? We print this part and ship it to your door. See its priceUpdated
2
Adjust
Change its numbers in the viewer for free, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use 2 credits per request (1 for a quick edit, 3 for a redesign), paid with a plan from Maker at $7.99 a month.3Print
Download a watertight STL or 3MF free, with your numbers and hand edits, or G-code sliced for your printer at the same price. After an AI change the download is included in every plan (4 credits without one).
Dimensions of the ready-made model (editable)
| Parameter | Value |
|---|---|
| pocket length (X) | 155 mm |
| pocket width (Y) | 70 mm |
| pocket depth (Z) - phone thickness | 14 mm |
| corner fillet radius | 4 mm |
| wall thickness | 2.4 mm |
| bottom lip height | 12 mm |
| floor thickness under phone (in lip zone) | 2 mm |
| USB-C slot width | 14 mm |
| USB-C slot height | 9 mm |
| extra clearance | 0.3 mm |
| finger thickness (spring) | 3 mm |
| hook depth at tip | 4 mm |
Example prompt
Model a car vent cradle for a folded Samsung Galaxy Z Fold 6 with a 155 x 70 x 14 mm pocket, 4 mm corner radii, a 12 mm bottom lip with a 14 x 9 mm USB-C slot, two 3 mm spring fingers for 2 to 5 mm vent slats and 2.4 mm walls.
Fit notes
Foldables are twice as thick as a normal phone, so a downloaded mount either squeezes the hinge or lets the phone fall out. In SpeakCAD you give the closed dimensions, your case if any, and the vent slat thickness, preview the mount in the browser, refine the fit in the chat, then download the STL.
Questions people ask about a Samsung Galaxy Z Fold 6 car vent mount folded
A vent cradle sized for the Samsung Galaxy Z Fold 6 when it is closed (153.5 x 68.1 x 12.1 mm), the thick form factor that most universal phone mounts cannot grip. The pocket is 155 x 70 x 14 mm with rounded corners, a 12 mm bottom lip cut by a 14 x 9 mm slot for the USB-C cable, and a rear opening so the hinge side rests fully supported. Two 3 mm spring fingers hook over vent slats from 2 to 5 mm thick; walls are 2.4 mm and the cradle prints face down.
Click Open it free on this page and create a free account (no card): the ready-made model opens in your browser, on your phone or computer, nothing to install. Change its numbers in the viewer for free and download a watertight STL or 3MF free, or G-code sliced for your printer at the same price. An AI change in the chat uses 2 credits per request (3 for a redesign), and the download after it is included in every plan (4 credits without one). Start with Maker: 50 credits a month for $7.99, cancel anytime.
On this page: open the ready-made model free in a SpeakCAD account (no card), change any dimension in the viewer, then download the STL or 3MF free, or G-code sliced for your printer at the same price.
A shared STL is modelled for someone else's measurements. Here you open the ready-made model free, change it to your measurements in the viewer, then download a file sized for the part you actually own, free as STL or 3MF.
Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.
No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.
Print it your way
More brackets & mounts
Samsung Galaxy Tab S9 wall mount bracket with charging slotReady-made, opens free. A wall bracket that turns a Samsung Galaxy Tab S9 (254.3 x 165.8 x 5.9 mm) into a smart home panel or family calendar.Ski and snowboard wall rack bracketReady-made, opens free. A wall bracket for a pair of skis or a snowboard, with two 150 mm arms that hang skis tips-up by the brakes or bindings, or a single 30 mm slot version that…Ryobi ONE+ battery wall mount strip for 18V packsReady-made, opens free. A strip of sockets for Ryobi ONE+ 18V batteries, from the slim 1.5 Ah to the 6 Ah High Performance packs, which all share the same stem.Razer BlackShark V2 under desk headset hangerReady-made, opens free. An under-desk hanger for the Razer BlackShark V2 Pro and similar wide-band gaming headsets from SteelSeries Arctis Nova, HyperX Cloud III and Logitech G Pro X.Dyson Gen5detect crevice-tool clipReady-made, opens free. A clip that holds the Gen5detect crevice tool on the wand so it does not live in the other room.Curtain rod bracket for a 25 mm poleReady-made, opens free. A replacement or extra bracket for a 25 mm curtain pole when the set came with too few or one broke.