1
Brackets & mounts
Ski and snowboard wall rack bracket
A wall bracket for a pair of skis or a snowboard, with two 150 mm arms that hang skis tips-up by the brakes or bindings, or a single 30 mm slot version that holds a board on its edge. The ski version spaces the arms 90 mm apart for waists from 70 to 110 mm, each arm is 20 mm wide with a 10 mm upturned lip and a 3 mm TPU or felt recess so the edges do not scratch. The 120 mm back plate has two countersunk 5 mm holes for stud screws. Print it on the back plate in PETG at 40 percent infill. Open the ready-made model free, resize it on your phone or computer, then download a print-ready STL, 3MF or G-code sliced for your printer, free.Opening the ready-made model and downloading it as STL or 3MF are free, no card; AI changes use credits, from Maker at $7.99 a month.No printer? We print this part and ship it to your door. See its priceUpdated
2
Adjust
Change its numbers in the viewer for free, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use 2 credits per request (1 for a quick edit, 3 for a redesign), paid with a plan from Maker at $7.99 a month.3Print
Download a watertight STL or 3MF free, with your numbers and hand edits, or G-code sliced for your printer at the same price. After an AI change the download is included in every plan (4 credits without one).
Dimensions of the ready-made model (editable)
| Parameter | Value |
|---|---|
| width | 120 mm |
| height | 60 mm |
| thickness (wall) | 6 mm |
| arm length from plate face | 150 mm |
| arm width | 20 mm |
| arm thickness (base 6mm + 3mm recess) | 9 mm |
| upturned lip height | 10 mm |
| lip thickness (same as wall) | 6 mm |
| from top/bottom edge | 15 mm |
Example prompt
Design a ski wall rack bracket with a 120 x 60 mm back plate, two 150 mm arms 20 mm wide spaced 90 mm apart with 10 mm upturned lips, a 3 mm recess on each arm for a pad, two countersunk 5 mm screw holes and 6 mm walls.
Fit notes
Skis from Salomon, Atomic and Rossignol have different waist widths and binding heights, and boards from Burton run 250 to 260 mm wide, so a measured rack hangs straighter and looks cleaner. Describe your gear in SpeakCAD, preview the bracket in the browser, tweak the spacing in the chat, then download the STL.
Questions people ask about a ski and snowboard wall rack bracket
A wall bracket for a pair of skis or a snowboard, with two 150 mm arms that hang skis tips-up by the brakes or bindings, or a single 30 mm slot version that holds a board on its edge. The ski version spaces the arms 90 mm apart for waists from 70 to 110 mm, each arm is 20 mm wide with a 10 mm upturned lip and a 3 mm TPU or felt recess so the edges do not scratch. The 120 mm back plate has two countersunk 5 mm holes for stud screws. Print it on the back plate in PETG at 40 percent infill.
Click Open it free on this page and create a free account (no card): the ready-made model opens in your browser, on your phone or computer, nothing to install. Change its numbers in the viewer for free and download a watertight STL or 3MF free, or G-code sliced for your printer at the same price. An AI change in the chat uses 2 credits per request (3 for a redesign), and the download after it is included in every plan (4 credits without one). Start with Maker: 50 credits a month for $7.99, cancel anytime.
On this page: open the ready-made model free in a SpeakCAD account (no card), change any dimension in the viewer, then download the STL or 3MF free, or G-code sliced for your printer at the same price.
A shared STL is modelled for someone else's measurements. Here you open the ready-made model free, change it to your measurements in the viewer, then download a file sized for the part you actually own, free as STL or 3MF.
Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.
No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.
Print it your way
More brackets & mounts
Owlet Dream Sock base station wall mountReady-made, opens free. A cradle that holds the Owlet Dream Sock or Smart Sock 3 base station on the nursery wall at eye level so the glowing ring is visible from the door and the c…Wyze Cam v4 eave mount with sun hoodReady-made, opens free. An eave bracket that hangs a Wyze Cam v4 (about 55 × 55 × 90 mm with the stand) under a soffit with a 20 mm sun hood.Dyson V10 cyclone tool railReady-made, opens free. A rail that hangs four V10 click-in tools beside the official wall dock so the crevice, combination and mini-motorhead are not on the floor.Adjustable support bracket for a sagging graphics cardReady-made, opens free. A telescoping pillar that stands on the PC case floor or power supply shroud and props up the far end of a heavy graphics card so it stops drooping in the PC…Brompton handlebar mount for Garmin Edge computersReady-made, opens free. Brompton M and S bars have a 22.2 mm grip section and very little real estate once the brake levers and shifter are on, so a normal out-front mount does not…Wyze Cam v3 corner wall mount with rain hoodReady-made, opens free. A corner bracket for the Wyze Cam v3, a 51 x 53 x 58 mm camera with a 1/4 inch-20 thread in its base.