1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Brackets & mounts
Wyze Cam v4 eave mount with sun hood
This is not a fixed STL. SpeakCAD generates the wyze cam v4 eave mount with sun hood to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a wyze cam v4 eave mount with sun hood is
An eave bracket that hangs a Wyze Cam v4 (about 55 × 55 × 90 mm with the stand) under a soffit with a 20 mm sun hood. The well is 57 mm with 0.4 mm clearance, two 4.5 mm holes sit on 40 mm centres, and a 8 mm cable slot exits the back. Print in PETG with 2 mm walls.
A v3 hood leaves the v4's new sensor in glare. Describe the soffit angle in SpeakCAD, preview the bracket in the browser without paying, then download the STL.
Example prompt
Model a Wyze Cam v4 eave mount 70×50×40 mm with a 57 mm well, 20 mm sun hood, two 4.5 mm holes on 40 mm centres, 8 mm cable slot and 2 mm PETG walls.
People also search
wyze cam v4 mount stlwyze v4 eave bracket 3d printwyze cam v4 sun hoodwyze v4 soffit mount 3d model
Questions people ask about a wyze cam v4 eave mount with sun hood
An eave bracket that hangs a Wyze Cam v4 (about 55 × 55 × 90 mm with the stand) under a soffit with a 20 mm sun hood. The well is 57 mm with 0.4 mm clearance, two 4.5 mm holes sit on 40 mm centres, and a 8 mm cable slot exits the back. Print in PETG with 2 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model a Wyze Cam v4 eave mount 70×50×40 mm with a 57 mm well, 20 mm sun hood, two 4.5 mm holes on 40 mm centres, 8 mm cable slot and 2 mm PETG walls.
A v3 hood leaves the v4's new sensor in glare. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
Bosch 18V GDR wall holsterA holster that parks a Bosch 18V GDR impact (about 140 mm) on a 4.5 mm hole pair.Adjustable support bracket for a sagging graphics cardA telescoping pillar that stands on the PC case floor or power supply shroud and props up the far end of a heavy graphics card so it stops drooping in the PC…Hex dumbbell wall mount holder bracketA pair of wall brackets that cradle a rubber hex dumbbell by its handle so a small home gym stays off the floor.IKEA Skadis holder for Wera Joker wrench setA stepped rack that clips to an IKEA Skadis pegboard and stands an 11-piece Wera Joker combination wrench set (8 to 19 mm) on edge in size order.iPhone 17 Pro MagSafe bike stem mountAn out-front bicycle mount that holds an iPhone 17 Pro (about 150 × 72 × 8.8 mm) on a MagSafe ring so the camera bar clears the stem.HomePod mini 2 outlet shelfA shelf that hangs a HomePod mini 2 from a US or EU outlet so it does not sit on the kitchen wet zone, 100 mm well and a 20 mm cable drop.