1
Brackets & mounts
BMW G20 3 Series vent slat phone clip
This is not a fixed STL. SpeakCAD generates the bmw g20 3 series vent slat phone clip to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design a BMW G20 vent hook clip, 22 mm deep hook, 2.5 mm slat gap, 20 mm frame foot, 17 mm ball stud for phone holders, PETG.
What a bmw g20 3 series vent slat phone clip is
A hook-style vent clip for the centre vents of a BMW G20 3 Series that grabs the vent housing behind the slats so heavy phones do not droop. The hook reaches 22 mm deep with a 2.5 mm gap for the slat, a 20 mm foot rests on the vent frame, and the front has a 17 mm ball stud for common ball-joint phone holders. Print on its side in PETG or ASA.
The G30 5 Series vents are a different depth, so tell the chat your slat spacing. Open the ready-made clip in SpeakCAD for free, change any millimetre in the viewer or the chat, then download the STL.
People also search
bmw g20 phone mountbmw 3 series vent phone holder stlg20 vent mount 3d printbmw phone holder vent clip
Questions people ask about a bmw g20 3 series vent slat phone clip
A hook-style vent clip for the centre vents of a BMW G20 3 Series that grabs the vent housing behind the slats so heavy phones do not droop. The hook reaches 22 mm deep with a 2.5 mm gap for the slat, a 20 mm foot rests on the vent frame, and the front has a 17 mm ball stud for common ball-joint phone holders. Print on its side in PETG or ASA.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design a BMW G20 vent hook clip, 22 mm deep hook, 2.5 mm slat gap, 20 mm frame foot, 17 mm ball stud for phone holders, PETG.
The G30 5 Series vents are a different depth, so tell the chat your slat spacing. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
Peloton Tread+ tablet riserA 30 mm riser that lifts a phone or small tablet on a Tread+ console so it sits above the official screen bezel.Shower curtain rail wall bracket for 25 mm railA wall bracket for 25 mm shower curtain rails, the end fixing that holds a straight rail between two walls.MSI Claw A1M wall mountA wall mount for the original MSI Claw A1M (294 × 117 × 21.2 mm at the body, about 40 mm deep at the grips) with two grip cups 42 mm wide and 42 mm deep, 1 m…iPad Pro 13 inch under-cabinet kitchen mountA pair of L-shaped hooks that screw to the underside of a kitchen cabinet and hold an iPad Pro 13 (281.6 x 215.5 x 5.1 mm) below eye level for recipes and vi…DeWalt 20V MAX battery wall rack with drop-in slotsA rail-style rack for DeWalt 20V MAX and XR batteries (also the 18V XR packs sold in Europe) that mirrors the slide-on rails of a DeWalt tool so a pack click…Air-hose reel wall guide 8 mmA wall guide that keeps an 8 mm ID air hose from rubbing the reel cheek, 40 mm ring with a 4.5 mm hole pair.