1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Brackets & mounts
25 mm French-cleat cordless-drill holder
This is not a fixed STL. SpeakCAD generates the 25 mm french-cleat cordless-drill holder to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a 25 mm french-cleat cordless-drill holder is
A French-cleat cradle for an 18V drill with a 50 mm handle saddle and a 20 mm battery rest, cut for a 25 mm cleat. The body is 80 × 70 × 90 mm. Print in PETG.
A nail hook bends a keyless chuck. Tell SpeakCAD the handle diameter, preview the cradle in the browser at no cost, then download the STL.
Example prompt
Design a 25 mm French-cleat drill holder 80×70×90 mm with a 50 mm handle saddle, 20 mm battery rest and 2.4 mm PETG walls.
People also search
french cleat drill holder stl25mm cleat drill cradle 3d printfrench cleat cordless holderworkshop cleat drill mount 3d model
Questions people ask about a 25 mm french-cleat cordless-drill holder
A French-cleat cradle for an 18V drill with a 50 mm handle saddle and a 20 mm battery rest, cut for a 25 mm cleat. The body is 80 × 70 × 90 mm. Print in PETG.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Design a 25 mm French-cleat drill holder 80×70×90 mm with a 50 mm handle saddle, 20 mm battery rest and 2.4 mm PETG walls.
A nail hook bends a keyless chuck. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
Hex dumbbell wall mount holder bracketA pair of wall brackets that cradle a rubber hex dumbbell by its handle so a small home gym stays off the floor.IKEA Skadis holder for Wera Joker wrench setA stepped rack that clips to an IKEA Skadis pegboard and stands an 11-piece Wera Joker combination wrench set (8 to 19 mm) on edge in size order.iPhone 17 Pro MagSafe bike stem mountAn out-front bicycle mount that holds an iPhone 17 Pro (about 150 × 72 × 8.8 mm) on a MagSafe ring so the camera bar clears the stem.HomePod mini 2 outlet shelfA shelf that hangs a HomePod mini 2 from a US or EU outlet so it does not sit on the kitchen wet zone, 100 mm well and a 20 mm cable drop.DeWalt FLEXVOLT battery wall rackA rack that hangs four FLEXVOLT 60V/20V batteries (about 110 × 80 mm) on a stud so they are not mixed with 20V MAX packs.Saddle clamp for 20 mm electrical conduitA single-screw saddle that fixes 20 mm PVC electrical conduit to a wall or joist, handy when a run needs one more clip and the shop is closed.