1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Brackets & mounts
Dyson V10 cyclone tool rail
This is not a fixed STL. SpeakCAD generates the dyson v10 cyclone tool rail to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a dyson v10 cyclone tool rail is
A rail that hangs four V10 click-in tools beside the official wall dock so the crevice, combination and mini-motorhead are not on the floor. The rail is 240 × 30 × 20 mm with four 32 mm clips on 55 mm centres and two 4.5 mm holes. Print in PETG with 2 mm walls.
V11 dock holders use a later click. Describe the tools in SpeakCAD, preview the rail in the browser for free, then download the STL.
Example prompt
Create a V10 tool rail 240×30×20 mm, four 32 mm clips on 55 mm centres, two 4.5 mm holes, 2 mm PETG.
People also search
dyson v10 tool rail stlv10 cyclone attachment holder 3d printdyson v10 wall clipsv10 tool organizer 3d model
Questions people ask about a dyson v10 cyclone tool rail
A rail that hangs four V10 click-in tools beside the official wall dock so the crevice, combination and mini-motorhead are not on the floor. The rail is 240 × 30 × 20 mm with four 32 mm clips on 55 mm centres and two 4.5 mm holes. Print in PETG with 2 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Create a V10 tool rail 240×30×20 mm, four 32 mm clips on 55 mm centres, two 4.5 mm holes, 2 mm PETG.
V11 dock holders use a later click. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
TP-Link Tapo C200 camera ceiling mount plateAn inverted mount plate for the TP-Link Tapo C200 pan and tilt camera, which is 86.6 x 85 x 117.7 mm and screws to a base with two holes about 50 mm apart.Meta Quest 3 headset wall hanger with strap restA wall hanger that carries a Meta Quest 3 (184 x 160 x 98 mm with the strap folded, about 515 g) by its facial interface bar, with a second, higher arm that…Sonos Era 300 wall bracket with cable channelA bracket that holds an Era 300 (about 260 mm wide) 40 mm off the wall with a 10 mm cable channel.IKEA EKET cabinet anti-tip bracketA bracket that ties an EKET cube (35 × 35 cm) to the wall so a stacked tower cannot tip.Wall holder for a 10 inch tabletA slim wall dock that turns a tablet into a fixed control panel for a smart home dashboard.MagSafe phone holder for shopping cart handleA hook that drops over a 25 to 30 mm shopping cart handle and presents a MagSafe magnet ring so an iPhone 15, 16 or any Qi2 phone hangs from its magnets whil…