1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Brackets & mounts
Aqara Presence Sensor FP2 45-degree corner bracket
This is not a fixed STL. SpeakCAD generates the aqara presence sensor fp2 45-degree corner bracket to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a aqara presence sensor fp2 45-degree corner bracket is
A corner bracket that aims an Aqara FP2 presence sensor (about 64 × 64 × 28 mm) at 45 degrees across a room. The well is 66 × 30 mm with 0.4 mm clearance, two 4.5 mm holes sit on 40 mm centres, and a 10 mm cable channel hides the USB-C lead. Print on its back in PLA with 2 mm walls.
A flat wall plate leaves the FP2 looking at the sofa arm. Describe the corner you have in SpeakCAD, preview the bracket in the browser at no cost, then download the STL.
Example prompt
Design an Aqara FP2 corner bracket 80×40×40 mm with a 66×30 mm well at 45 degrees, 0.4 mm clearance, two 4.5 mm holes on 40 mm centres and a 10 mm cable channel.
People also search
aqara fp2 corner mount stlaqara presence sensor bracket 3d printfp2 45 degree mountaqara fp2 corner bracket 3d model
Questions people ask about a aqara presence sensor fp2 45-degree corner bracket
A corner bracket that aims an Aqara FP2 presence sensor (about 64 × 64 × 28 mm) at 45 degrees across a room. The well is 66 × 30 mm with 0.4 mm clearance, two 4.5 mm holes sit on 40 mm centres, and a 10 mm cable channel hides the USB-C lead. Print on its back in PLA with 2 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Design an Aqara FP2 corner bracket 80×40×40 mm with a 66×30 mm well at 45 degrees, 0.4 mm clearance, two 4.5 mm holes on 40 mm centres and a 10 mm cable channel.
A flat wall plate leaves the FP2 looking at the sofa arm. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
Saddle clamp for 20 mm electrical conduitA single-screw saddle that fixes 20 mm PVC electrical conduit to a wall or joist, handy when a run needs one more clip and the shop is closed.Hammerhead Karoo 2 out-front mount with GoPro undersideThe Hammerhead Karoo 2 is a big unit at 100.6 x 60.8 x 19.3 mm and needs an arm long enough to clear the stem faceplate.Milwaukee M12 battery wall mount holder for 4 packsA wall strip with four sockets that grip the stem of Milwaukee M12 batteries, from the compact CP1.5 to the XC6.0, so charged packs hang ready beside the cha…Nintendo Switch OLED dock wall mount holderA wall bracket that holds the Nintendo Switch dock beside or behind a TV so the console docks vertically and the HDMI, power and USB cables stay hidden.UniFi Express 7 wall shelfA 140 mm shelf that holds a UniFi Express 7 with a 16 mm WAN cutout and two 4.5 mm holes.IKEA HEMNES bookcase anti-tip bracketA bracket that ties a HEMNES bookcase (90 cm) to the wall through the existing top-rail holes.