1
Brackets & mounts
Sony A6700 Arca-Swiss plate
This is not a fixed STL. SpeakCAD generates the sony a6700 arca-swiss plate to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Design an Arca-Swiss plate for a Sony A6700, 38×60×9 mm, 38 mm dovetail, 1/4-20 slot under the lens, 2 mm anti-twist lip on the grip side.
What a sony a6700 arca-swiss plate is
A short Arca-Swiss plate for the Sony A6700 (122 × 69 × 75.1 mm). The plate is 38 × 60 × 9 mm with a 38 mm dovetail, a 1/4-20 slot that sits under the lens mount and a 2 mm anti-twist lip on the grip side. It stops short of the battery door, so you can swap the NP-FZ100 without removing it. Print flat in PETG at 100% infill.
The A6400 has a smaller grip (120 × 66.9 × 59.7 mm), so the lip sits too far out. Open the ready-made model in SpeakCAD for free, adjust any millimetre, then download the STL.
People also search
sony a6700 arca plate stla6700 quick release plate 3d printa6700 arca swisssony a6700 tripod plate
Questions people ask about a sony a6700 arca-swiss plate
A short Arca-Swiss plate for the Sony A6700 (122 × 69 × 75.1 mm). The plate is 38 × 60 × 9 mm with a 38 mm dovetail, a 1/4-20 slot that sits under the lens mount and a 2 mm anti-twist lip on the grip side. It stops short of the battery door, so you can swap the NP-FZ100 without removing it. Print flat in PETG at 100% infill.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Design an Arca-Swiss plate for a Sony A6700, 38×60×9 mm, 38 mm dovetail, 1/4-20 slot under the lens, 2 mm anti-twist lip on the grip side.
The A6400 has a smaller grip (120 × 66.9 × 59.7 mm), so the lip sits too far out. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
Garmin Edge 130 Plus stem top cap mountA stem top cap with a built-in Garmin quarter-turn tab that holds a small Edge 130 Plus right above the steerer.Bracket to fit a 2.5 inch SSD in a 3.5 inch bayA rail-style bracket that positions a 2.5 inch SSD inside a 3.5 inch drive bay so the case's standard screws or tool-less clips engage.Sonos Roam wall holder with USB-C charging cutoutA cradle that holds a Sonos Roam upright on a bathroom or kitchen wall while a USB-C cable stays plugged into the back.Pedaltrain Classic pedalboard riser for Boss pedalsA rear-row riser that clips onto the two back rails of a Pedaltrain Classic or Classic Jr and lifts a Boss compact pedal (73 x 129 x 59 mm) by 40 mm so its f…Philips Hue Dimmer v2 magnetic wall plateA plate that holds a Hue Dimmer switch v2 (about 92 × 35 mm) on a steel door or fridge so it is not taped to the wall.GL.iNet Beryl AX travel router mountA strap-on mount for a GL.iNet Beryl AX (GL-MT3000, about 120 × 83 × 34 mm) that holds it on a desk leg, van wall or hotel TV cable.