Ibanez RG headstock guitar wall hanger angled
A wall hanger shaped for the narrow, pointed reverse headstocks on Ibanez RG, S and JEM models, which slip out of the wide yokes made for a Fender Stratocaster or Gibson Les Paul. The yoke opening is 44 mm at the throat, tapering to 40 mm behind the nut, with 6 mm thick arms wrapped in a printed TPU sleeve pocket so the finish is never touched, and the whole yoke is angled 15 degrees so the body hangs flat against the wall. A 3 mm back plate with two 4.5 mm holes at 50 mm spacing takes the roughly 3.5 kg of a loaded RG. Print the arms upright with 3.5 mm walls and 40 percent infill.
An Ibanez neck is not a Squier neck, and a generic yoke lets it swing. Describe your headstock width at the nut in SpeakCAD, preview the hanger in the browser without paying, ask for a straight version for a Gibson SG in the chat, and download the STL.
Model an angled guitar wall hanger for an Ibanez RG headstock with a yoke opening 44 mm at the throat tapering to 40 mm, 6 mm arms 60 mm long angled 15 degrees, a 2 mm recess per arm for a TPU sleeve, a 3 mm back plate with two 4.5 mm holes 50 mm apart, 3.5 mm walls.