1
The prompt on this page opens in SpeakCAD already filled in — after sign-in too. The model renders in your browser. Preview is free.Brackets & mounts
Peloton Bike+ phone shelf
This is not a fixed STL. SpeakCAD generates the peloton bike+ phone shelf to your millimetres, you adjust it in the chat, then you download and print it.2
Change any millimetre in the chat: wall thickness, hole size, the thing it clips onto. Iterations stay in the tab until it matches what you own.Adjust
3Print
Download a watertight STL or 3MF for 2 credits, drop it in your slicer, and print it. Small fit fixes re-download free.Get it nowThe example prompt comes with you, even through sign-in. Preview is free; a download costs 2 credits.
What a peloton bike+ phone shelf is
A shelf that clips onto a Bike+ handlebar (about 40 mm) and holds a phone at 15 degrees so you are not stacking it on the tablet. The well is 80 × 14 mm with a 12 mm USB-C slot. Print in PETG with 2 mm walls.
The original Bike phone-tablet tray is a different bar. Tell SpeakCAD Bike+ vs Bike, preview the shelf in the browser without paying, then download the STL.
Example prompt
Model a Bike+ phone shelf, 80×14 mm well at 15 degrees, 40 mm bar clip, 12 mm USB-C slot, 2 mm PETG.
People also search
peloton bike plus phone stlbike+ phone shelf 3d printpeloton bike+ phone holderbike plus phone tray 3d model
Questions people ask about a peloton bike+ phone shelf
A shelf that clips onto a Bike+ handlebar (about 40 mm) and holds a phone at 15 degrees so you are not stacking it on the tablet. The well is 80 × 14 mm with a 12 mm USB-C slot. Print in PETG with 2 mm walls.
Click Get it now on this page: the example prompt is filled in for you after you sign in. The model renders in your browser — nothing to install — and previewing is free. Adjust any millimetre in the chat, then export a watertight STL or 3MF for 2 credits when you want to print.
Start from this working example and replace any number with what you measured: Model a Bike+ phone shelf, 80×14 mm well at 15 degrees, 40 mm bar clip, 12 mm USB-C slot, 2 mm PETG.
The original Bike phone-tablet tray is a different bar. In SpeakCAD you generate and preview for free, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
Aqara Presence Sensor FP2 45-degree corner bracketA corner bracket that aims an Aqara FP2 presence sensor (about 64 × 64 × 28 mm) at 45 degrees across a room.Dyson V12 Detect Slim tool clipA clip that snaps a V12 Detect Slim crevice or combination tool onto the wand so it travels with the vacuum.Bosch 18V GDR wall holsterA holster that parks a Bosch 18V GDR impact (about 140 mm) on a 4.5 mm hole pair.iPhone 16 Pro Max car vent mount with MagSafe cutoutA cradle that hooks over a horizontal dashboard vent slat and holds an iPhone 16 Pro Max (163 x 77.6 x 8.25 mm) in portrait or landscape.Kettlebell wall rack hook for garage gymA hook that hangs a light kettlebell (up to about 12 kg) by its handle against a garage wall, freeing floor space beside the squat rack.Wall Control pegboard hook for Milwaukee M12 toolsA cradle that hooks onto Wall Control metal pegboard and hangs Milwaukee M12 tools such as the Fuel drill, impact driver or ratchet by their battery foot, wi…