TP-Link Tapo C200 camera ceiling mount plate
An inverted mount plate for the TP-Link Tapo C200 pan and tilt camera, which is 86.6 x 85 x 117.7 mm and screws to a base with two holes about 50 mm apart. This plate reproduces those two 4 mm holes on a 90 mm disc, 4 mm thick, with a 25 mm central hole for the micro USB power cable, and a 15 mm spacer ring so the camera hangs below the ceiling with room for the plug. Three 5 mm countersunk holes at 120 degrees take ceiling plugs or joist screws. Walls are 3 mm and it prints flat with no supports.
The stock bracket assumes a flat plaster ceiling, and downloads often use the C210 or C220 hole pattern. In SpeakCAD you describe your camera and ceiling, preview the plate free in the browser, adapt to a Tapo C500 or add a cable channel in the chat, and download the STL.
Design a 90 mm diameter ceiling mount plate 4 mm thick for a TP-Link Tapo C200 camera with two 4 mm camera screw holes 50 mm apart, a 25 mm central cable hole, a 15 mm tall spacer ring with 3 mm walls and three 5 mm countersunk ceiling screw holes at 120 degree spacing.