1
Brackets & mounts
Insta360 X4 helmet top mount
This is not a fixed STL. SpeakCAD generates the insta360 x4 helmet top mount to your millimetres, you adjust it in the chat, then you download and print it.Building the 3D preview…
2
Adjust
Click a part and change its numbers in the viewer, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use plan credits.3Print
Download a watertight STL or 3MF with a Maker or Pro plan, drop it in your slicer, and print it. Small fit fixes re-download free.
Get it nowOpening the ready-made model is free. A plan covers AI changes and the download.
Example prompt
Create an Insta360 X4 helmet mount, 55×45 mm base with 150 mm curve, 2 mm VHB recess, 30 mm riser with captive 1/4-20 bolt, PETG.
What a insta360 x4 helmet top mount is
A helmet-top base for an Insta360 X4 (46 × 123.6 × 37.6 mm) with a captive 1/4-20 bolt, so the 360 camera stands upright on top of a motorcycle or bike helmet. The base is 55 × 45 mm with a 150 mm curve, a 2 mm recess takes a VHB pad, and a 30 mm riser keeps the lenses above the shell. Print on its back in PETG or ASA.
The X3 and X5 use the same 1/4-20 thread but differ in height, so the riser can be changed. Open the ready-made mount in SpeakCAD for free, change any millimetre in the viewer or the chat, then download the STL.
People also search
insta360 x4 helmet mountinsta360 x4 motorcycle mount stl360 camera helmet mount 3d printinsta360 helmet top mount
Questions people ask about a insta360 x4 helmet top mount
A helmet-top base for an Insta360 X4 (46 × 123.6 × 37.6 mm) with a captive 1/4-20 bolt, so the 360 camera stands upright on top of a motorcycle or bike helmet. The base is 55 × 45 mm with a 150 mm curve, a 2 mm recess takes a VHB pad, and a 30 mm riser keeps the lenses above the shell. Print on its back in PETG or ASA.
Click Get it now on this page and sign in: you can open the ready-made model for free, and the example prompt is filled in if you want the AI to redesign it. The model renders in your browser, nothing to install. Change any millimetre in the viewer or the chat (AI changes use plan credits), then export a watertight STL or 3MF with a Maker or Pro plan when you want to print.
Start from this working example and replace any number with what you measured: Create an Insta360 X4 helmet mount, 55×45 mm base with 150 mm curve, 2 mm VHB recess, 30 mm riser with captive 1/4-20 bolt, PETG.
The X3 and X5 use the same 1/4-20 thread but differ in height, so the riser can be changed. In SpeakCAD you open the ready-made model for free, change it to your measurements, then download a file sized for the part you actually own.
No. SpeakCAD runs entirely in the browser: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL or 3MF.
More brackets & mounts
Wall hook for coiled extension cordsA deep, wide hook that hangs a coiled extension cord or garden lead on the garage wall without kinking it.Shimano Di2 junction box holder for 31.8 mm handlebarThe Shimano SM-EW90 Di2 junction A normally hangs under the stem on a rubber band, where it rattles and gets pulled by the bar bag straps.Xbox Series S wall mount bracket verticalA two-piece bracket set that hangs an Xbox Series S (275 x 151 x 63.5 mm, 1.93 kg) vertically on the wall next to the TV with its big round fan facing the room.Dyson V8 Fluffy soft-roller wall hookA hook that hangs the V8 Fluffy soft roller (about 230 mm wide) next to the V8 holster so the roller is not stored on its bristles.MikroTik hAP ac lite wall mountA wall cradle for a MikroTik hAP ac lite (113 × 89 × 28 mm) that holds it on edge with the ports facing down, so cables drop straight to the floor.SP Connect handlebar clamp for 22.2 to 28.6 mm barsA two-piece handlebar clamp for 22.2 mm (7/8 inch), 25.4 mm (1 inch) and 28.6 mm fat motorcycle bars, with a 40 × 40 mm flat top pad drilled so a store-bough…