1
Brackets & mounts
Ceiling mount ring for a round access point
A ring-shaped mounting plate for disc-style wireless access points that ship without a suitable ceiling bracket, or whose original plate was lost. The ring has an outer diameter matched to the device, three bayonet tabs on the inner edge that engage the slots on the back of the AP with a quarter turn, a central 30 mm cable opening and four 4.5 mm screw holes on a 70 mm circle for a standard ceiling box. A 4 mm thick plate with slightly chamfered tabs makes the twist-lock smooth and secure. Open the ready-made model free, resize it on your phone or computer, then download a print-ready STL, 3MF or G-code sliced for your printer, free.Opening the ready-made model and downloading it as STL or 3MF are free, no card; AI changes use credits, from Maker at $7.99 a month.No printer? We print this part and ship it to your door. See its priceUpdated
2
Adjust
Change its numbers in the viewer for free, or ask the AI in the chat: wall thickness, hole size, the thing it clips onto. AI changes use 2 credits per request (1 for a quick edit, 3 for a redesign), paid with a plan from Maker at $7.99 a month.3Print
Download a watertight STL or 3MF free, with your numbers and hand edits, or G-code sliced for your printer at the same price. After an AI change the download is included in every plan (4 credits without one).
Dimensions of the ready-made model (editable)
| Parameter | Value |
|---|---|
| ring outer diameter | 150 mm |
| ring plate thickness | 4 mm |
| centre cable hole | 30 mm |
| bolt circle diameter for screws | 70 mm |
| screw clearance hole diameter | 4.5 mm |
| arc width of tab | 12 mm |
| tab protrusion height above ring top | 3 mm |
Example prompt
Design a ceiling mount ring for a 160 mm round access point. Ring outer diameter 150 mm, 4 mm thick, 30 mm centre hole. Three bayonet tabs 12 mm wide and 3 mm tall at 120 degree spacing. Four 4.5 mm screw holes on a 70 mm circle.
Fit notes
Tab positions and diameters differ for every model, which makes this an ideal case for describing rather than downloading. Tell SpeakCAD the AP diameter, the number of slots and their angles, and preview the ring. Adjust tab thickness or screw circle in the chat before you commit credits.
Questions people ask about a ceiling mount ring for a round access point
A ring-shaped mounting plate for disc-style wireless access points that ship without a suitable ceiling bracket, or whose original plate was lost. The ring has an outer diameter matched to the device, three bayonet tabs on the inner edge that engage the slots on the back of the AP with a quarter turn, a central 30 mm cable opening and four 4.5 mm screw holes on a 70 mm circle for a standard ceiling box. A 4 mm thick plate with slightly chamfered tabs makes the twist-lock smooth and secure.
Click Open it free on this page and create a free account (no card): the ready-made model opens in your browser, on your phone or computer, nothing to install. Change its numbers in the viewer for free and download a watertight STL or 3MF free, or G-code sliced for your printer at the same price. An AI change in the chat uses 2 credits per request (3 for a redesign), and the download after it is included in every plan (4 credits without one). Start with Maker: 50 credits a month for $7.99, cancel anytime.
On this page: open the ready-made model free in a SpeakCAD account (no card), change any dimension in the viewer, then download the STL or 3MF free, or G-code sliced for your printer at the same price.
A shared STL is modelled for someone else's measurements. Here you open the ready-made model free, change it to your measurements in the viewer, then download a file sized for the part you actually own, free as STL or 3MF.
Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.
No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.
Print it your way
More brackets & mounts
IKEA Ribba frame tabletop stand for 21 x 30 cmReady-made, opens free. A pair of feet that lets a wall-only IKEA Ribba frame stand on a desk or shelf, since Ribba frames come without a back easel.Peloton Guide camera shelf riserReady-made, opens free. A riser that lifts a Peloton Guide (about 140 × 50 × 25 mm) 40 mm above a TV console so the camera sees over a soundbar.HomePod mini 2 outlet shelfReady-made, opens free. A shelf that hangs a HomePod mini 2 from a US or EU outlet so it does not sit on the kitchen wet zone, 100 mm well and a 20 mm cable drop.VESA bracket for a mini PC behind a monitorReady-made, opens free. A plate that bolts to the 100 x 100 mm VESA holes behind a monitor and holds a small form-factor PC in a cradle, freeing desk space and hiding cables.Garmin Varia radar mount for aero seatpostReady-made, opens free. The rubber band mount supplied with the Garmin Varia RTL515 and RCT715 is designed for round posts and sits crooked on the D-shaped aero seatposts found on C…UniFi U6 Lite ceiling tile adapter plateReady-made, opens free. A plate that lets a Ubiquiti UniFi U6 Lite access point clip to a suspended ceiling grid instead of being screwed through a soft tile.