Brackets & mounts

VESA bracket for a mini PC behind a monitor

A plate that bolts to the 100 x 100 mm VESA holes behind a monitor and holds a small form-factor PC in a cradle, freeing desk space and hiding cables. The plate has four 4.5 mm holes at 100 mm spacing for M4 screws, a 3 mm base and two opposing lips 20 mm tall with 0.8 mm clearance around the PC body. Slots between the lips let the fan exhaust flow, and a groove on the lips takes an elastic band for security if the monitor is tilted.

Mini PCs range from tiny sticks to NUC-sized boxes, so a downloaded cradle almost never matches. Give SpeakCAD the width, depth and height of your unit and the correct VESA pattern, preview the fit for free, then ask for extra vent slots or a cable clip before downloading.

Get it nowGenerate and preview for free, in your browser. A download costs 2 credits.

Design a VESA 100x100 bracket for a mini PC 117x112x35 mm. Base plate 130x125x3 mm with four 4.5 mm holes at 100 mm spacing. Two opposite lips 20 mm tall, 3 mm thick, 0.8 mm clearance, four 40x6 mm vent slots and a 3 mm strap groove per lip.

Change any number to match what you measured. The AI keeps the rest of the design consistent, and small follow-up edits after a download are free.

More brackets & mounts

Xbox Series S wall mount bracket verticalA two-piece bracket set that hangs an Xbox Series S (275 x 151 x 63.5 mm, 1.93 kg) vertically on the wall next to the TV with its big round fan facing the room.Under-shelf bracket for a cable trayA J-shaped bracket that screws to the underside of a shelf or table and cradles a bundle of cables or a slim power strip out of sight.Samsung Galaxy Z Fold 6 car vent mount foldedA vent cradle sized for the Samsung Galaxy Z Fold 6 when it is closed (153.5 x 68.1 x 12.1 mm), the thick form factor that most universal phone mounts cannot…Wahoo KICKR trainer phone holder for handlebarA cradle that clamps a 31.8 mm handlebar on the bike you keep on a Wahoo KICKR, Tacx or Elite trainer and holds a phone at 60 degrees so Zwift, TrainerRoad o…Starlink Gen 3 router wall mount bracketA bracket that stands the Starlink Gen 3 router upright on a wall or under a shelf so it does not take up a desk.Tesla NACS mobile connector wall holster and cable hookA holster for the Tesla NACS plug on the Mobile Connector or Wall Connector, with a separate hook for the 6 m cable and a shelf for the control box.

Make your vesa bracket for a mini pc behind a monitor now

Nothing to install and no CAD skills needed. Describe it, watch it render, download the STL or 3MF and print it tonight.

Get it nowBrowse the library
Looking for a ready-made version? Check the marketplace, where makers sell finished, rated models for credits.