Bambu Lab A1 AMS Lite spool holder riser bracket
A riser that lifts the Bambu Lab AMS Lite 60 mm above the desk so the four spools clear the A1 or A1 mini bed when the printer sits on a shelf, and adds feet that stop the unit sliding. The AMS Lite base has two mounting bosses for its supplied stand on a 220 mm pitch, so the riser uses matching 6 mm pins with 0.2 mm clearance and a 25 by 25 mm foot on each corner. Two 5 mm thick legs with a 30 mm web give rigidity; print them upright in PETG with 4 walls so they do not flex under four kilograms of filament.
Everyone's shelf height and bed position is different, so a fixed riser is either too tall or clips the gantry. In SpeakCAD you set the lift and footprint, preview it in the browser without paying, add cable routing or a desiccant shelf in the chat, and download the STL.
Create a two-leg riser 260 mm wide, 60 mm tall and 5 mm thick joined by a 30 mm web, with two 6 mm locating pins 220 mm apart with 0.2 mm clearance on top, four 25 by 25 mm feet with 2 mm rubber pad recesses, and 3 mm fillets at all joints.