Brackets & mounts

Button box tilt bracket for a sim rig profile

A tilt bracket that mounts a button box on a 40 series aluminium profile and angles it 20 degrees towards the driver. The base takes two M8 bolts 40 mm apart into the 8 mm slot, and the 120 × 70 mm top plate has two slots for M4 screws into the box, 90 mm apart, with access holes above the M8 bolts so a hex key reaches them. The base is 6 mm thick, the top plate and end webs 4 mm. Print it standing on one end web in PETG, without supports. Describe your measurements and SpeakCAD builds it with AI (credits), then download STL, 3MF or sliced G-code.
No ready-made model yet: building it uses credits (4 credits for the part on a plan, its first 3 small changes free; Maker: 50 credits a month for $7.99, cancel anytime).Updated

No ready-made model for this part yet

Sign in and SpeakCAD builds it from the prompt below (4 credits for the part on a plan, its first 3 small changes free; Maker: 50 credits a month for $7.99, cancel anytime). Want to try the editor first? The live demo is free, no account.
1

Describe

Sign in: the example prompt below is filled in. SpeakCAD builds the part from it with AI, 4 credits for the part on a plan, its first 3 small changes free (Maker: 50 credits a month for $7.99, cancel anytime). Replace any number with what you measured first.
2

Adjust

Change its numbers in the viewer for free, or ask the AI for a change in the chat (2 credits for a small change, 1 for a quick edit, 3 for a redesign; the first 3 small changes are free on a plan).
3

Print

Download a watertight STL or 3MF, included in every plan (4 credits without one), or G-code sliced for your printer at the same price.

Example prompt

Model a tilt bracket that mounts a button box on a 40 series aluminium profile. Base 120 × 40 × 6 mm with two 8.4 mm holes for M8 bolts, 40 mm apart, centred. A top plate 120 × 70 × 4 mm rises at 20 degrees from the front edge of the base and is closed at both ends by triangular webs 4 mm thick. In the top plate, two slots 4.5 mm wide and 30 mm long, 90 mm apart, for M4 screws into the box, and two 12 mm access holes directly above the M8 holes for a hex key. Print standing on one end web, no supports.

Build it with AI opens the app with this prompt already typed. Replace any number with what you measured before sending it; the rest of the design stays consistent.

Fit notes

Button boxes do not share a hole pattern, and the right angle depends on where the box sits: shallow beside the wheel, much steeper on a low side arm. A shared bracket fixes both. In SpeakCAD you type the screw spacing of your box and the tilt you want, and the webs and access holes move with them.

Also searched as: button box mount sim rig stl, button box tilt bracket 3d print, sim racing button box bracket 4040, aluminium profile button box mount.

Questions people ask about a button box tilt bracket for a sim rig profile

A tilt bracket that mounts a button box on a 40 series aluminium profile and angles it 20 degrees towards the driver. The base takes two M8 bolts 40 mm apart into the 8 mm slot, and the 120 × 70 mm top plate has two slots for M4 screws into the box, 90 mm apart, with access holes above the M8 bolts so a hex key reaches them. The base is 6 mm thick, the top plate and end webs 4 mm. Print it standing on one end web in PETG, without supports.

There is no ready-made model for this part yet. Click Build it with AI and sign in: the example prompt on this page is filled in, and SpeakCAD builds the part from it in your browser (4 credits for the part on a plan, its first 3 small changes free). Change any number in the viewer for free, then download a watertight STL or 3MF, included in every plan (4 credits without one), or G-code sliced for your printer at the same price. Start with Maker: 50 credits a month for $7.99, cancel anytime.

SpeakCAD builds it to your measurements from the example prompt on this page: the part uses 4 credits on a plan, its first 3 small changes free (3 without a plan), and a small change after them 2, then the STL or 3MF download is included in every plan (4 credits without one), or G-code sliced for your printer at the same price. Start with Maker: 50 credits a month for $7.99, cancel anytime. To try the editor before paying, the live demo is free, no account.

A shared STL is modelled for someone else's measurements. SpeakCAD builds this part to the millimetres you give it (AI requests use credits), so the file you download is sized for the part you actually own.

Yes. SpeakCAD slices the part on its servers with OrcaSlicer and your printer's official profile (380+ printers, including Bambu Lab, Prusa, Creality and Elegoo), and you download the G-code (a sliced .gcode.3mf for Bambu Lab printers). G-code sliced for your printer costs the same as the STL: included in every plan, free for a part you shaped by hand, 4 credits without a plan for a part with AI work in it. Pick your printer on the printers page to see its profile.

No. SpeakCAD runs in the browser on your phone or computer: the chat, the 3D engine and the live viewer load in the tab. The only file you download is the finished STL, 3MF or sliced G-code.

Build, adjust and print your button box tilt bracket for a sim rig profile

Nothing to install. The prompt is waiting in the app after you sign in: SpeakCAD builds the part with AI (credits), no CAD skills needed, you check the fit, then download the STL, 3MF or sliced G-code.

Looking for a finished design by a maker? Browse the brackets & mounts on the marketplace, where makers share their models, most of them free.