Curtain rod bracket for a 25 mm pole
A replacement or extra bracket for a 25 mm curtain pole when the set came with too few or one broke. It is a wall plate with an arm ending in an open 26 mm cup, holding the pole about 80 mm from the wall so the curtain clears the window frame. A 6 mm thick arm, a 3 mm grub screw hole through the cup and two 5 mm wall screw holes give enough rigidity for a full-length curtain. Print with the wall plate face down so the arm is strong along its length.
Rather than searching for a bracket that happens to match your pole diameter and projection, describe them to SpeakCAD and get a part built around those numbers. Change the stand-off distance or add a matching end bracket in the conversation. Previewing is free.
Design a curtain rod bracket for a 25 mm pole. Wall plate 60x40x5 mm with two 5 mm countersunk holes. Arm 6 mm thick projecting 80 mm to an open cup of 26 mm inner diameter, 20 mm wide, with a 3 mm grub screw hole. 3 mm fillets.